User Guide

User Interface

• Marked: the number of marked packets

• Dropped: the number of dropped packets (only displayed if Wireshark was unable to capture all

packets)

• Ignored: the number of ignored packets (only displayed if packets are ignored)

• The right side shows the selected configuration profile. Clicking in this part of the statusbar will

bring up a menu with all available configuration profiles, and selecting from this list will change the

configuration profile.

Figure 3.22. The Statusbar with a configuration profile menu

For a detailed description of configuration profiles, see Section 10.6, “Configuration Profiles”.

Figure 3.23. The Statusbar with a selected protocol field

This is displayed if you have selected a protocol field from the "Packet Details" pane.

Tip!

The value between the brackets (in this example arp.opcode) can be used as a display filter

string, representing the selected protocol field.

Figure 3.24. The Statusbar with a display filter message

This is displayed if you are trying to use a display filter which may have unexpected results. For a detailed

description, see Section 6.4.4, “A common mistake”.