User Guide

User Interface

Menu Item Accelerator Description

Enabled

Protocols...

Shift+Ctrl+E This menu item allows the user to enable/disable protocol

dissectors, see Section 10.4.1, “The "Enabled Protocols" dialog

box”

Decode As... This menu item allows the user to force Wireshark to decode

certain packets as a particular protocol, see Section 10.4.2, “User

Specified Decodes”

User Specified

Decodes...

This menu item allows the user to force Wireshark to decode

certain packets as a particular protocol, see Section 10.4.3, “Show

User Specified Decodes”

------

Follow TCP

Stream

This menu item brings up a separate window and displays all the

TCP segments captured that are on the same TCP connection as a

selected packet, see Section 7.2, “Following TCP streams”

Follow UDP

Stream

Same functionality as "Follow TCP Stream" but for UDP streams.

Follow SSL

Stream

Same functionality as "Follow TCP Stream" but for SSL streams.

XXX - how to provide the SSL keys?

Expert Info Open a dialog showing some expert information about the captured

packets. The amount of information will depend on the protocol

and varies from very detailed to non-existent. XXX - add a new

section about this and link from here

Conversation

Filter > ...

In this menu you will find conversation filter for various protocols.

3.11. The "Statistics" menu

The Wireshark Statistics menu contains the fields shown in Table 3.8, “Statistics menu items”.