User Guide

File Input / Output and Printing
95
Note!
These Print command fields are not available on windows
platforms.
This field specifies the command to use for printing. It is typically lpr. You would
change it to specify a particular queue if you need to print to a queue other than
the default. An example might be:
lpr -Pmypostscript
This field is greyed out if Output to file: is checked above.
Packet Range Select the packets to be printed, see Section 5.9, “The Packet Range frame”
Packet Format Select the output format of the packets to be printed. You can choose, how each
packet is printed, see Figure 5.20, “The "Packet Format" frame”
5.9. The Packet Range frame
The packet range frame is a part of various output related dialog boxes. It provides options to select which
packets should be processed by the output function.
Figure 5.19. The "Packet Range" frame
If the Captured button is set (default), all packets from the selected rule will be processed. If the Displayed
button is set, only the currently displayed packets are taken into account to the selected rule.
• All packets will process all packets.
• Selected packet only process only the selected packet.
• Marked packets only process only the marked packets.
• From first to last marked packet process the packets from the first to the last marked one.
• Specify a packet range process a user specified range of packets, e.g. specifying 5,10-15,20- will
process the packet number five, the packets from packet number ten to fifteen (inclusive) and every
packet from number twenty to the end of the capture.
5.10. The Packet Format frame
The packet format frame is a part of various output related dialog boxes. It provides options to select which
parts of a packet should be used for the output function.