User Guide

9.10. Tektronix K12xx/15 RF5 protocols Table
The Tektronix K12xx/15 rf5 file format uses helper files (*.stk) to identify the various protocols that
are used by a certain interface. Wireshark doesn't read these stk files, it uses a table that helps it
identify which lowest layer protocol to use.
Stk file to protocol matching is handled by an Section 9.7, “User Table” with the following fields.
match A partial match for an stk filename, the first match wins, so if you have a specific case
and a general one the specific one must appear first in the list.
protos This is the name of the encapsulating protocol (the lowest layer in the packet data) it can
be either just the name of the protocol (e.g. mtp2, eth_witoutfcs, sscf-nni ) or the name
of the encapsulation protocol and the "application" protocol over it separated by a colon
(e.g sscop:sscf-nni, sscop:alcap, sscop:nbap, ...)
Customizing Wireshark
186