User Guide

Select the color you desire for the selected packets and click on OK.
Note!
You must select a color in the colorbar next to the colorwheel to load values into the
RGB values. Alternatively, you can set the values to select the color you want.
Figure 9.4, “Using color filters with Wireshark” shows an example of several color filters being
used in Wireshark. You may not like the color choices, however, feel free to choose your own.
If you are uncertain which coloring rule actually took place for a specific packet, have a look at the
[Coloring Rule Name: ...] and [Coloring Rule String: ...] fields.
Figure 9.4. Using color filters with Wireshark
Customizing Wireshark
173