User Guide
• Time: the timestamps when the first and the last packet were captured (and the time between
them).
• Capture: information from the time when the capture was done (only available if the packet
data was captured from the network and not loaded from a file).
• Display: some display related information.
• Traffic: some statistics of the network traffic seen. If a display filter is set, you will see values in
the Captured column, and if any packages are marked, you will see values in the Marked
column. The values in the Captured column will remain the same as before, while the values in
the Displayed column will reflect the values corresponding to the packets shown in the display.
The values in the Marked column will reflect the values corresponding to the marked packages.
Statistics
150