Installation Manual

page | 9
© 2021 Wirepath Home Systems, LLC
Back panel
A. Bluetooth Antenna
B. Speaker outputs: 10-position Phoenix-style connectors for 5-channel
speaker wiring.
C. LFE OUTPUT (subwoofer output): Unbalanced port to connect an external
subwoofer.
D. RESET: A pinhole button for resetting the amplifier.
• Quick momentary press = Reboot.
• Press and hold for 5 seconds = Returns network to DHCP defaults.
• Press and hold for 10+ seconds = Returns device to its factory default
configuration.
E. AUX/OPTICAL input: 3.5 mm combo jack.
• 3.5 mm stereo port for connection to the analog line output of your
audio/video source.
• 3.5 mm optical adapter for connecting to the optical audio output of your
TV or other audio/video source.
F. HDMI IN ports (3): HDMI type A connector for connecting to the HDMI output
of your audio/video source.
G. HDMI OUT (ARC) [audio return channel]: HDMI type A connector (1).
• For connection to the HDMI(ARC) input on your TV
H. Network: Standard RJ45 connector with LED indicator. 10/100 Ethernet.
Port remains active when amp is in Standby mode.
I. IR power ON/OFF: If on, +12V DC is applied to the IR IN jack, providing
power for an external IR receiver.
• Note: Do not turn on IR power if a direct connection to a control system
is used.
J. IR Status: LED illuminates when the IR signal is received
K. IR IN: 3.5 mm stereo port. The adaptive IR input circuit supports 38 KHz
carrier frequencies.
L. Power connector: Use the supplied power cord to connect power.
100-120V/220-240V~
50/60Hz 200W
A B C D E F G H I J K L