Installation Manual

page | 15
© 2021 Wirepath Home Systems, LLC
LFE output
The LFE (low-frequency effects) port accepts a standard RCA cable and connects
to the LFE input on a subwoofer speaker.
USING THE BROWSER INTERFACE
1. Connect an Ethernet Cat 5e/6 cable from a local network connection into the
RJ45 port on the amplifier.
2. Power on the amplifier.
3. In a web browser on the same local network, enter the amplifier’s IP address
that was assigned by the router (such as 192.168.1.2). The login screen
opens.
4. Enter the default user name (“episode”) and the default (first-time only)
password “episode”. The amplifier’s configuration screen opens.
Note: The first time you access the interface, or after a reset to factory
default settings, you must change the password.