Installation Manual

page | 13

Optical digital input

1. Connect the OPTICAL IN connector of the amplifier to the OPTICAL OUT

connector of your audio/video source with an optical cable.

2. Enable Use Optical through the browser user interface.

Notes:

• Make sure the protective cap has been removed from both ends of the optical

cable.

• Make sure you have connected one optical adapter

before

inserting into the

amplifier.

Connecting with Bluetooth

You can conveniently connect the amplifier to your mobile device wirelessly with

Bluetooth.

To establish a Bluetooth® connection:

1. Make sure the included Bluetooth antenna is installed on the back of the

amplifier.

2. Enable the input (Bluetooth) through the browser user interface.

3. Start the search on your mobile device.

4. Select EA-MINI-5.1D-200 as the playback device. After confirmation, the

connection is established automatically.

5. Start a title on your mobile device, and the sound should automatically output

through the amplifier.

Connecting with AUX

1. Connect a 3.5 mm stereo cable from the AUX port on the back of the amplifier

and the line out on your mobile device. Or, connect a 3.5 mm-to-RCA stereo

cable to the unbalanced output port of any audio/video source.

2. Disable Use Optical through the browser user interface.