Specifications

ManualsBrandsWIRENOT ManualsAudio EquipmentBluetooth Earphone

Connect to other devices

Open the headphone box lid, automatically turn on the earphone after taking it out, then go to

the Bluetooth set of mobile phone and select Airbuds connection

Touch function

When there is an incoming call, make two clicks on the top of the left headset sleeve

to answer/hang up the call, play/pause music, play the next song at two consecutive points, play

the next song at three consecutive points, long press for two seconds wake up the intelligent

voice assistant, there is no touch function on the right

Check the charging state

When Airbuds is in the headphone box, the indicator lights are red and blue lights,such as single

ear charging, left ear red light and right ear blue lamp. If the headset is not in the box, the

indicator lights go out.

Check the amount of electricity in the headset

Click on the headphone box switch, and the light flashes 4 times to indicate the remaining 100%

electric quantity, 3 times remaining 75%, flash 2 times remaining50%, and flash the remaining

25%.

Charge

When the headset is charged, the indicator light is red and full of electric blue light

Airbuds it will automatically charge in the headphone box, full of electric indicating lights

Airbuds Compatible with most bluetooth terminal devices

Bluetooth

To turn off Bluetooth on Airbuds put them in The case and close it

parameter specification

Bluetooth solution;realtek

Bluetooth protocol: V5.0

Transmission distance: over 10m without obstacle

Frequency:2.4 GHZ

Talk time: about 5.hours

Listening time: about 3 hours

Standby time: about 120 hours.

Functional features

Latest 5.0 bluetooth protocol

Ultra-low power consumption

Support binaural communication

Music is 2.5 hours long

Hi-fi sound quality

Summary of content (4 pages)

PAGE 1
Connect to other devices Open the headphone box lid, automatically turn on the earphone after taking it out, then go to the Bluetooth set of mobile phone and select Airbuds connection Touch function When there is an incoming call, make two clicks on the top of the left headset sleeve to answer/hang up the call, play/pause music, play the next song at two consecutive points, play the next song at three consecutive points, long press for two seconds wake up the intelligent voice assistant, there is no touch f
PAGE 2
Safety and handling Important safety information Handle Airbuds and case with care they Contain sensitive electronic components Including batteries and can be damaged or Cause injury if dropped burned punctured Crushed disassembled or if exposed to Excessive heat or liquid Don’t use damaged Airbuds or case, Batteries Don’t attempt to replace Airbuds or case Batteries yourself you may damage the Batteries which could cause overheating And injury, Lightning cable and connector Avoid prolonged skin contact wit
PAGE 3
manufacturer for information Specific to your medical device stop using Airbuds and case if you suspect they are Interfering with your pacemaker defibrillator Or any other medical device.
PAGE 4
following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help.