Cut Sheet

ManualsBrandsWiremold ManualsBoxes4-Compartment Combination Box, Depth: 3-7/16", Metallic

WIREMOLD

Resource RFB

Series Floor Boxes

Recessed Floor Boxes for Concrete & Wood Floors

Resource RFB

Series of Floor Boxes are versatile recessed

activation solutions that provide power, communication and/or

audio/video services to open space areas, or directly to workstations.

Resource RFB Series Floor Boxes are available in two- to six-gang

models with a variety of aesthetic cover options including colors and

profiles available.

Resource RFB Series Floor Boxes have many applications, including

schools, financial institutions, commercial office buildings,

hospitality and residences.

FEATURES & BENEFITS

n RFB6 & RFB6E have independent

wiring compartments that allow

capacity for up to six duplex

receptacles and/or communication

services. Reduces overall cost by

providing for most cabling requirements.

n The RFB4 has three versions for

various applications. A cast iron

version to meet on grade requirements,

a steel version to reduce installation

cost on above grade floors, and a

shallow steel version that provides

flexibility with varying concrete depths.

n Fully adjustable before and after

the concrete pour. Labor savings by

adapting to various pour depths and

conditions.

n Range of conduit sizes. Allows for

most conduit schemes, even feed

through capability, which saves time

and money during installation. KOs

range from 1/2" to 2" trade size.

n Triple service boxes. Accommodate

power, communication and/or audio/

video devices which reduces the need for

multiple boxes.

n Accepts round Evolution

™

Series

Covers. RFB4E Series Floor Box accept

the round 6" Evolution

™

Series Covers

while RFB6E Series Floor Box accepts

the round 8" Evolution

™

Series Covers

increasing the ability to match aesthetics

throughout the building.

n RFB2 & RFB4 shallow versions allow

pass-around tunneling. Flexibility in

design to have adjacent compartments

wired together.

n Redesigned FloorPort Activation

Covers. Provides TopGuard protection

from water, dirt and debris plus

added strength and durability. Now

available in brushed aluminum and five

decorative powder coat finishes: Black,

Brass, Nickel, Gray and Bronze.

n Wide variety of mounting brackets.

Can adapt to most power and

communication needs. Reduces overall

life cycle cost.

n RFB4E and RFB6E Series Floor Boxes

available for bare concrete and

terrazzo floors. By using RFB4E-CTR

or RFB6E-CTR Rings (sold separately)

these boxes can be installed into bare

concrete or terrazzo floors with a clean,

aesthetic finish.

n Datacom connectivity options.

Accepts industry standard and

proprietary devices from a wide range

of manufacturers to provide a seamless

and aesthetically pleasing interface

for voice, data, audio, and video

applications at the point-of-use. A wide

selection of data and adapter options

are available for use with Ortronics

TracJack

™

and Series II devices.

n 2" Conduit Hub. By using 2HUB with the

RFB4E Series Floor Box (sold separately)

a greater capacity of pre-terminated

cables can be brought in the a shallower

box. Increasing the functionality and

reducing concrete pours.

n Installs in both concrete and wood

floors. Provides the first recessed wood

floor box for both commercial and

residential applications. Available for

RFB2, RFB6 and RFB6E Series

Floor Boxes.

n Lightweight “slab-on-grade” version.

Special fusion-bonded epoxy corrosion

resistant paint finish allows for slab-on-

grade use without the weight of cast

iron material. Available in RFB2, RFB4E,

RFB6 and RFB6E Series Floor Boxes.

n Accepts Floorport

™

Activation Covers.

Allows a consistent aesthetic finish

for the RFB2, RFB4 & RFB6 Series

Recessed Floor Boxes.

n Buy America Act/NAFTA versions.

FloorPort Service Fittings are now

available in versions that meet the

Buy America Act/NAFTA requirements.

n UL Listed to U.S. and Canadian safety

standards for tile, terrazzo, carpet and

wood floors.

ED771R24 – Updated February 2017 – For latest specs visit www.legrand.us/wiremold

Protection from water,

dirt, and debris.

RFB4 Series Floor Box with the

new FloorPort Activation Cover.

Download this product’s PEP ecopasport

environmental product declaration at

www.legrand.us/resources-and-downloads.

This declaration conforms with ISO 14025 and

14040 and is in alignment with EN 15804.

Summary of content (24 pages)

PAGE 1
WIREMOLD® Resource RFB® Series Floor Boxes Recessed Floor Boxes for Concrete & Wood Floors Resource RFB® Series of Floor Boxes are versatile recessed activation solutions that provide power, communication and/or audio/video services to open space areas, or directly to workstations. Resource RFB Series Floor Boxes are available in two- to six-gang models with a variety of aesthetic cover options including colors and profiles available.
PAGE 2
Resource RFB Series Floor Box Selection Guide Box Model Install Floor Type: Wood Concrete Box Type: Box Capacity: Depth Behind A/V Trade Size Plates: Compatibility Conduit Feed: Cover Style Country of Origin 2 Gangs 3" [76mm] 1/2" – 1 1/4" FloorPort Mexico Yes Above Grade Above Grade 2 Gangs 3" [76mm] 1/2" – 3/4" FloorPort Mexico Yes Yes On-Grade 2 Gangs 3" [76mm] 1/2" – 1 1/4" FloorPort Mexico RFB4 Yes No 4 Gangs 2" [51mm] 1/2" – 1 1/4" FloorPort Mexico RFB4-4DB Yes No
PAGE 3
RFB2 Series Multiservice Steel Recessed Floor Box Ordering Information Catalog No./Item Description/Specifications RFB2 Two-Compartment Box – For use in either concrete 3/4" or wood floors. Fully adjustable with tunnel compartment. 3 7/16" [19.1mm] [87mm] Supplied with one (1) duplex receptacle mounting plate, and one (1) communication mounting plate (RFB22AB). Other device plates sold separately.
PAGE 4
RFB2 Series Multiservice Steel Recessed Floor Box Accessories Catalog No./Item RFBKIT Description/Specifications Catalog No./Item Barrier Kit – Barrier kit used to separate power and communication wires in partition feed covers. Supplied with base and three extensions to adjust to cover height. Kit should be used on RFB2, RFB2-OG, RFB2-SS, RFB4 and RFB4-SS Floor Boxes. Kits are sold separately. PKER Mudcap Extensions – Attaches to preset to add height to preset.
PAGE 5
FloorPort Series Cover Assemblies for RFB2 Series Floor Boxes FLOORPORT PART NUMBER CONFIGURATOR FP FloorPort Cover B TC Blank Top B Cutout Top C Furniture Feed FF Tile (Flangeless) T Tile/Carpet TC (Flanged) NK Nickel Brass Black Bronze Gray Brushed Aluminum NK BS BK BZ GY AL FloorPort Series Flanged Cover Assemblies Ordering Information Catalog No./Item Description/Specifications Catalog No.
PAGE 6
North American Made FloorPort Series Cover Assemblies for RFB2 Series Floor Boxes NORTH AMERICAN MADE FLOORPORT PART NUMBER CONFIGURATOR FP FloorPort Cover B TC Blank Top B Cutout Top C Furniture Feed FF NA NK Tile (Flangeless) T Tile/Carpet TC (Flanged) Nickel Brass Black Bronze Gray Brushed Aluminum NK BS BK BZ GY AL North American NA Made North American Made FloorPort Series Flanged Cover Assemblies Ordering Information Catalog No./Item Description/Specifications Catalog No.
PAGE 7
RFB4 & RFB4-4DB Series Multiservice Steel Recessed Floor Box Ordering Information Catalog No./Item Description/Specifications RFB4 Four-Compartment Combination Box – 12 3/4" L 10" [254mm] x 10" W x 3 7/16" D [324mm x 254mm x 87mm]. Fully 5 7/8" adjustable with tunnel compartment and two receptacle [149mm] brackets. Tunneling from end power compartment to end power compartment only. Communication brackets not included. See “Accessories”. NOTE: Only for use in concrete floors.
PAGE 8
RFB4 & RFB4-4DB Series Multiservice Steel Recessed Floor Box Accessories Catalog No./Item Description/Specifications Catalog No./Item RFB-B Internal Blank Bracket – Power compartments only. Used to close off unused gangs. DTB-2-4TKO Communication Bracket – Four (4) RJ keystone opening knockouts. Use as blank plate or for up to four (4) RJ openings. NOTE: For RFB4 only. Country of Origin: USA RFB-DR Internal Duplex Bracket – Accepts standard 15 Amp & 20 Amp Duplex Receptacles.
PAGE 9
RFB4 & RFB4-4DB Series Multiservice Steel Recessed Floor Box Accessories (continued) Catalog No./Item FP-CTR Description/Specifications Catalog No./Item Bare Concrete & Terrazzo Ring – Nonmetallic ring for use on bare polished concrete and terrazzo floor applications. Description/Specifications RFBKIT Country of Origin: USA Barrier Kit – Barrier kit used to separate power and communication wires in partition feed covers.
PAGE 10
RFB4-CI-1 Series Multiservice Cast Iron Floor Box Accessories Catalog No./Item Description/Specifications Catalog No./Item CIHT-D Internal Duplex Receptacle Bracket – Accepts standard 15 Amp & 20 Amp Duplex Receptacles. RFBCIKIT Internal Blank Bracket – Used to close off unused gangs. FP-CTR Country of Origin: USA CIHT-GFI Barrier Kit – Barrier kit used with RFB4-CI Floor Boxes. Kits are sold separately.
PAGE 11
RFB4-SS Series Compartment Capacities/Knockout Locations & Sizes Power or Data 15.7 cu. in. [257 ml] 1" [25mm] 1" 3/4" [19.1mm] [25mm] 3/4" [19.1mm] Power or Data 31.2 cu in. [511 ml] Power or Data 31.2 cu in. [511 ml] Power or Data 15.7 cu in. [257 ml] 1" [25mm] 3/4" [19.1mm] 3/4" [19.1mm] 3/4" [19.1mm] 1" [25mm] 1" [25mm] 1/2" [12.7mm] 1/2" [12.7mm] 1" [25mm] FOR RFB4-SS 1" [25mm] Indicates Bottom KO 1" 3/4" [19.
PAGE 12
RFB4-SS Series Multiservice Shallow Steel Floor Box Accessories Catalog No./Item S3AXBP Description/Specifications Blanking Plate – Aluminum top plate with steel support plate and four (4) adjusting screws.
PAGE 13
FloorPort Series Cover Assemblies for RFB4 Series Floor Boxes FLOORPORT PART NUMBER CONFIGURATOR FP FloorPort Cover B TC Blank Top B Cutout Top C Furniture Feed FF Tile (Flangeless) T Tile/Carpet TC (Flanged) NK Nickel Brass Black Bronze Gray Brushed Aluminum NK BS BK BZ GY AL FloorPort Series Flanged Cover Assemblies Ordering Information Catalog No./Item Description/Specifications Catalog No.
PAGE 14
North American Made FloorPort Series Cover Assemblies for RFB4 Series Floor Boxes NORTH AMERICAN MADE FLOORPORT PART NUMBER CONFIGURATOR FP FloorPort Cover B TC Blank Top B Cutout Top C Furniture Feed FF NA NK Tile (Flangeless) T Tile/Carpet TC (Flanged) Nickel Brass Black Bronze Gray Brushed Aluminum NK BS BK BZ GY AL North American NA Made North American Made FloorPort Series Flanged Cover Assemblies Ordering Information Catalog No./Item Description/Specifications Catalog No.
PAGE 15
RFB4E Series Multiservice Steel Recessed Floor Box Ordering Information Catalog No./Item Description/Specifications RFB4E Four-Compartment Box – For use in concrete floors. For use with the round Evolution cover. Fully adjustable with tunnel compartments. Device Plates sold separately. 13 1/8" [334mm] 1 13/32" [36mm] 13 1/8" [334mm] RFB4E-OG Country of Origin: Mexico 4 1/16" [103mm] Four-Compartment On-Grade Box – For use in concrete floors. For use with the round Evolution cover.
PAGE 16
RFB4E, RFB6 & RFB6E Series Multiservice Steel Recessed Floor Box Accessories Catalog No./Item RFB4EKIT Description/Specifications Catalog No./Item Description/Specifications Barrier Kit – Barrier kit used to separate power and communication services in combination with a 6CFFTC Furniture Feed Cover. (sold separately).
PAGE 17
Evolution Series Cover Assemblies for RFB4E & RFB4E-OG Floor Boxes Catalog No./Item 6CTC2BK 6CTC2BS 6CTC2GY 6CTC2NK 6CTC2BZ 6CTC2AL Description/Specifications 7 1/4" (184mm) 8° Beveled Edge Catalog No./Item Surface Style Cover Assembly – Low profile cover.
PAGE 18
Evolution Series Cover Assemblies for RFB4E & RFB4E-OG Floor Boxes Catalog No./Item Description/Specifications 6CFFTCBK 6CFFTCBS 6CFFTCGY 6CFFTCNK 6CFFTCBZ Catalog No./Item Furniture Feed Cover Assembly – Surface style, die-cast aluminum cover assembly, with one (1) 3/4" trade size screw plug opening and one (1) concentric 2"-1 1/4" trade size screw plug opening. Includes one (1) 3/4" and one (1) 2" trade size conduit fittings.
PAGE 19
RFB6 Series Compartment Capacities/Knockout Locations & Sizes Side Knockout Locations A B B Bottom Knockout Locations Compartment Wire and Communication Compacities A A B B A A A Compartment C Compartment C C C Compartment D B C C Compartment D B C C A A A B B Compartment C Compartment C A A B KNOCKOUTS KNOCKOUTS A = Bottom KO 1 1/4" [32mm] B = Bottom KO 3/4" [19.1mm] A = Side KO 1 1/4" [32mm] B = Side KO 1" [25mm] C = Side KO 3/4" [19.
PAGE 20
RFB6 & RFB6E Series Multiservice Steel Recessed Floor Box Accessories Catalog No./Item Description/Specifications Catalog No./Item RFB6EXT Internal Audio/Video Bracket – Accepts three (3) Legrand AVIP or Extron® Electronics MAAP Series devices (sold separately). PKER Mudcap Country of Origin: USA Extensions – Attaches to preset to add height to preset. Can be field installed.
PAGE 21
Evolution Series Cover Assemblies for RFB6E & RFB6E-OG Floor Boxes Catalog No./Item 8CTC2BK 8CTC2BS 8CTC2GY 8CTC2NK 8CTC2BZ 8CTC2AL Description/Specifications 9 1/4" (235mm) Catalog No./Item Surface Style Cover Assembly – Low profile cover designed to attach to the 8STC and 8STCP Poke-Thru Stem Assemblies.
PAGE 22
Evolution Series Cover Assemblies for RFB4E & RFB4E-OG Floor Boxes Catalog No./Item Description/Specifications RFB6E-CTR are Concrete & Terrazzo Ring – B Nonmetallic ring for use with bare concrete and terrazzo floor applications. Catalog No./Item 8TS Country of Origin: USA NOTE: Only for use on RFB6E and RFB6E-OG Floor Boxes. NOTE: Designed to work with 8CTC & 8CT Series Covers only. Description/Specifications Tile Shim – Used for floor coverings greater than 5/16" (7.9mm).
PAGE 23
FloorPort Series Cover Assemblies for RFB2, RFB4 & RFB6 Series Floor Boxes FLOORPORT PART NUMBER CONFIGURATOR FP FloorPort Cover B TC Blank Top B Cutout Top C Furniture Feed FF Tile (Flangeless) T Tile/Carpet TC (Flanged) NK Nickel Brass Black Bronze Gray Brushed Aluminum NK BS BK BZ GY AL FloorPort Series Flanged Cover Assemblies Ordering Information Catalog No./Item Description/Specifications Catalog No.
PAGE 24
North American Made FloorPort Series Cover Assemblies for RFB2, RFB4 & RFB6 Series Floor Boxes NORTH AMERICAN MADE FLOORPORT PART NUMBER CONFIGURATOR B FP FloorPort Cover TC Blank Top B Cutout Top C Furniture Feed FF NA NK Tile (Flangeless) T Tile/Carpet TC (Flanged) Nickel Brass Black Bronze Gray Brushed Aluminum NK BS BK BZ GY AL North American NA Made North American Made FloorPort Series Flanged Cover Assemblies Ordering Information Catalog No.