Cut Sheet

Catalog No./Item Description/Specifications
RFB119-2SAB Communication Device
Plate – Available in two-gang
sectional width. Provided with
bezel to accept up to three
dual Wiremold Open System
communication modules or
Pass & Seymour
®
Activate
Connectivity System inserts.
Modules and inserts sold
separately.
RFB119-2SRT Communication Device
Plate – Available in two-gang
sectional width. Provided with
one opening to accept one
Ortronics
®
TracJack bezel and
one Ortronics
®
Series II bezel.
Will accept up to six Ortronics
®
TracJack devices or up to three
dual Ortronics
®
Series II modular
inserts. Modular inserts and
devices sold separately.
Catalog No./Item Description/Specifications
RFB119-SPACER Spacer Plate – Used to close
off openings when certain
combinations of standard
width device plates leave
open spaces. Four (4) spacer
plates are included with the
RFB11 and two (2) are
provided with the RFB9.
RFB119-SXLR Microphone Device
Plate – Available in sectional
width. Provided with double
opening to accept two
microphone devices
6
WIDTH HEIGHT
CAT. NO. Inches [mm] Inches [mm]
RFB119-B 2 3/4 69.8 4 1/2 114.3
RFB119-3B 6 3/8 161.9 4 1/2 114.3
RFB119-D 2 3/4 69.8 4 1/2 114.3
RFB119-3D 6 3/8 161.9 4 1/2 114.3
RFB119-SD 1 13/16 46.0 4 1/2 114.3
RFB119-GFI* 2 3/4 69.8 4 1/2 114.3
RFB119-3GFI 6 3/8 161.9 4 1/2 114.3
RFB119-SR1* 2 3/4 69.8 4 1/2 114.3
RFB119-SR2* 2 3/4 69.8 4 1/2 114.3
RFB119-SSR2* 1 13/16 46.0 4 1/2 114.3
RFB119-SR3* 2 3/4 69.8 4 1/2 114.3
RFB119-KO* 2 3/4 69.8 4 1/2 114.3
RFB119-AB 2 3/4 69.8 4 1/2 114.3
RFB119-2SAB* 3 5/8 92.1 4 1/2 114.3
RFB119-RT 2 3/4 69.8 4 1/2 114.3
RFB119-XLR 2 3/4 69.8 4 1/2 114.3
RFB119-SPACER* 7/8 21.7 4 1/2 114.3
RFB119-MAAP* 2 3/4 69.8 4 1/2 114.3
RFB9/11 Floor Boxes Steel Standard Device Plate Dimensions
RFB9/11 Series Floor Boxes Steel Sectional Device Plates Ordering Information (continued)
RFB119-2SAB
RFB119-2SRT
RFB119-SXLR
Diameter
0.875"
[22.2mm]
Diameter
0.109"
[2.8mm]
1"
[25.4mm]
0.375"
[9.5mm]
0.750"
[19.1mm]
RFB9/11 Series Floor Boxes Steel Standard Device Plate Installation Information
MULTI-GANG MOUNTING BRACKETS USED WITH STANDARD DEVICE PLATES
3-Gang Standard Plate
6 3/8" x 4 1/2"
[162mm x 114mm]
1-Gang Standard Plate
2 3/4" x 4 1/2"
[70mm x 114mm]
Cat. No. RFB119-SPACER
Used to close gap between standard
single and multi-gang plates
Cat. No. RFB119-SB
Single-gang sectional blank plate
(Mounted off-center)
2-gang standard plate
4 9/16" x 4 1/2"
[116mm x 114mm]
RFB119-SPACER
Country of Origin: Mexico
Country of Origin: Mexico
Country of Origin: Mexico
Country of Origin: Mexico
* Country of Origin: Mexico