Installation Manual

Step 3 ATTACH CONDUIT FEED(S)

Insert conduit feeds to bottom of box and tighten

mounting screws. Reattach Top Cover on housing.

Step 4 MOUNT BOX TO DECK

Align conduit feeds with deck holes and lower onto

deck. Attach with screws or weld.

Attach to Deck with

Screws or weld

Conduit Feed

Tighten Screws

Hole in base

of Floor Box

to accept

Conduit Feed

Step 5A RFB4-SSFC – INSERT TUNNELING BARRIERS

Determine power/communication distribution inside of box and slide tunneling

barrier(s) into slots adjacent to passageway(s). Fit molded housing over baseplate and

attach cover mounting bracket with #10-24x3/16" screws to baseplate.

CAUTION: RFB4-SSFC barriers cannot be altered after concrete pour.

Slide barrier(s) into

channels in bottom

of molded housing

Direction of cable

passge. Barrier must

be omitted to allow

similar services to

pass from end

compartments to

side compartments

Tunneling for (2) Power & (2) Communication Tunneling for (1) Power & (3) Communication or

(3) Power & (1) Communication

Barriers

Passageway