Cut Sheet
9
Catalog No./Item Description/Specifications
RC9AFFTCGY Assembled Furniture
RC9AFFTCBK Feed Unit – Complete
with hexagonal service
head. Service head has one
3/4" threaded conduit hub
and five rubber grommets.
The service head includes
scrub water gasket. Unit
is supplied with one 1 1/4"
trade size conduit stem and
one 1/2" trade size conduit
stem to feed power and
communication services.
UL Listed for tile, carpet,
and wood covered floors.
For complete listing of
RC9FFTC Series accessories,
see current version of Product
Specification Sheet ED1215.
Catalog No./Item Description/Specifications
RC9AM2TCGY Furniture Feed Poke-Thru
RC9AM2TCBK Assembled Unit- Complete
RC9AM2TCAL with combination 1 1/4" and 2"
trade size threaded conduit
openings and closure plugs.
Must be used with a conduit
connector (not included) at
the adapter assembly plate
to maintain fire classification.
UL Listed for tile, carpet,
and wood covered floors.
For complete listing of
RC9AM2TC Series accessories,
see current version of Product
Specification Sheet ED1216.
Chicago Approved Poke-Thru Devices Ordering Information (Continued)
16 5/8"
[422mm]
NOTE:
• Service head is not to be used as a junction box. All
power connections must be made in a junction box
below (not supplied).
• Maximum concrete slab depth for
RC9AM2TC Series = 7.50" [190mm].
• For installations in the City of Chicago, install an EMT
compression fitting (not supplied) to the conduit system
and a junction box suitable for use in environmental air
spaces, if required, (not supplied). Complete installation
per NEC and local codes.
NOTE:
• Service head is not to be used as a junction box. All
power connections must be made in a junction box
below (not supplied).
• Maximum concrete slab depth for
RC9AFF Series = 7.50" [190mm].
• For installations in the City of Chicago, install an EMT
compression fitting (not supplied) to the conduit system
and a junction box suitable for use in environmental air
spaces, if required, (not supplied). Complete installation
per NEC and local codes.
Catalog Number Explanation
RC9AFFTCGY
RC9 A FF TC GY
Identifies Identifies Identifies Identifies Identifies Color
Poke-Thru Assembled Furniture that Unit is of Cover
Series Unit (A) or Feed Unit Approved for Assembly
Cover (C) Tile and (See below
Carpet Floors for details)
Catalog Number Explanation
RC9AM2TCAL
RC9 AM 2 TC AL
Identifies Identifies Identifies Identifies Identifies Color
Poke-Thru Assembled Furniture that Unit is of Cover
Series Unit (A) or Feed Unit Approved for Assembly
Cover (C) Tile and (See below
Carpet Floors for details)
Poke-Thru Devices on this page are available in some or all of the
following cover color options as indicated by the part numbers:
GY – Gray painted flange with gray nonmetallic cover,
BK – Black painted flange with black nonmetallic cover,
VY – Ivory painted flange with ivory nonmetallic cover,
AL – Brushed Aluminum flange with black nonmetallic cover
BS – Brushed Brass flange with black nonmetallic cover
AA –
Brushed Aluminum flange with aluminum-colored nonmetallic cover
AB – Brushed Brass flange with brass-colored nonmetallic cover
Where applicable, slide covers match the cover color.
CAUTION!
Core bits vary in size from manufacturer to manufacturer.
Use an American made core bit having the following
dimensions:
For 3" trade size core hole:
Core bit will have an outside
diameter of 3 1/16" [78mm].
Minimum hole diameter: 3 1/16" [78mm].
Maximum hole diameter: 3 1/8" [79mm].
For 4" trade size core hole:
Core bit will have an outside
diameter of 4 1/16" [103mm].
Minimum hole diameter: 4 1/16" [103mm].
Maximum hole diameter: 4 1/8" [105mm].
IMPORTANT!
The scrub water approved poke-thru devices indicated on the previous
pages are fire rated for carpet and wood covered floors, tile floor
coverings up to 3/4" [19.1mm] maximum thickness, and linoleum floor
coverings up to a maximum of 1/8" [3.2mm] thickness. For other floor
coverings not listed above, consult factory.
The scrub water approved poke-thru devices indicated on the previous
pages, meet all UL scrub water requirements, but are not suitable for
wet or damp locations, or other areas subject to saturation with water
or other liquids, such as commercial kitchens.