Cut Sheet

7
Catalog No./Item Description/Specifications
4FFATCGY-LJB Flush Furniture Feed
4FFATCBK-LJB Poke-Thru Unit – Complete
4FFATCAL-LJB with one-piece finish flange
4FFATCBS-LJB and conduit assembly. Conduit
assembly consists of one 3/4"
trade size conduit and one
1 1/4" trade size conduit.
Finish cover flange provided
with one 3/4" trade size screw
plug opening and one 1 1/4"
trade size screw plug opening.
The 4FFATC Series requires
a 4" core hole (4 1/16" [103mm]
actual hole diameter).
For complete listing of 4FFATC
Series accessories, see
Product Specification sheet
ED1216R3.
UL Listed for tile, carpet,
and wood covered floors.
For complete listing of
4FFATC Series accessories,
see current version of Product
Specification Sheet ED1216.
Chicago Approved Poke-Thru Devices Ordering Information
(Continued)
Protection from water,
dirt, and debris.
NOTE:
• Maximum concrete slab depth for
4FFATC Series = 7.50" [190mm].
• For installations in the City of Chicago, install a junction
box suitable for use in environmental air spaces, if required,
(not supplied). Complete installation per NEC and local codes.
Maximum Allowable Copper Cross-Sectional Area:
4FFATC Power Compartment only
= .08192 sq. in. [52.85mm
2
].
4FFATC Power Compartment only
= .072 sq. in. [46.45mm
2
].
NOTE: To abandon 4FFATC Series, disconnect conduit adapters and install
closure plugs.
NOTE: Assembled with scrub
water gasket. For use on
tile or carpet floors.
7 1/2"
[191mm]
9 11/16"
[246mm]
Catalog Number Explanation
4FFATCAL-LJB
4 FF A TC AL LJB
Identifies Identifies Identifies Identifies Identifies Color Identifies
Poke-Thru Furniture Assembled that Unit is of Cover Junction
Series Feed Unit Unit (A) or Approved for Assembly Box (Not
Cover (C) Tile and (See below included)
Carpet Floors for details)
Poke-Thru Devices on this page are available in some or all of the
following cover color options as indicated by the part numbers:
GY – Gray painted flange with gray nonmetallic cover,
BK – Black painted flange with black nonmetallic cover,
VY – Ivory painted flange with ivory nonmetallic cover,
AL – Brushed Aluminum flange with black nonmetallic cover
BS – Brushed Brass flange with black nonmetallic cover
AA – Brushed Aluminum flange with aluminum-colored nonmetallic cover
AB – Brushed Brass flange with brass-colored nonmetallic cover
Where applicable, slide covers match the cover color.