Cut Sheet
Catalog No./Item Description/Specifications
RC3ATCGY-LJB* Assembled Unit – Prewired
RC3ATCBK-LJB* 20A duplex receptacle can be
RC3ATCAL-LJB* wired as standard duplex
RC3ATCBS-LJB* or isolated ground. Wiremold
RC3ATCVY-LJB* Open System unloaded inserts
RC3ATCAB-LJB* to accept four discrete
keystone connectors from
most manufacturers
are provided.
• Includes 2 Ortronics TracJack
mounting bezels and 2
Ortronics Series II bezels.
(Modular Jacks sold
separately.)
The RC3 Series requires a 4"
core hole (4 1/16" [103mm]
actual hole diameter).
UL Listed for tile, carpet,
and wood covered floors.
For complete listing of RC3
Series accessories, see
current version of Product
Specification Sheet ED1215.
Catalog No./Item Description/Specifications
RC4ATCGY-LJB* Assembled Unit – Unit
RC4ATCBK-LJB* includes four prewired 20A
RC4ATCAL-LJB* receptacles. Each duplex
RC4ATCBS-LJB* can be wired as a separate
RC4ATCAB-LJB* circuit. The duplex can be
RC4ATCVY-LJB* wired as a standard receptacle
or isolated ground.
Wiremold Open System
unloaded inserts to accept
four discrete keystone
* connectors from most
manufacturers are provided.
• Includes Ortronics TracJack
mounting bezel and
Ortronics Series II
communication housing.
(Modular Jacks sold
separately.)
The RC4 Series requires a 4"
core hole (4 1/16" [103mm]
actual hole diameter).
UL Listed for tile, carpet,
and wood covered floors.
For complete listing of RC4
Series accessories, see
current version of Product
Specification Sheet ED1215.
3
Chicago Approved Poke-Thru Devices Ordering Information
(Continued)
7 1/2"
[191mm]
8 1/4"
[210 mm]
9"
[228mm]
9 1/16"
[230mm]
Protection from water,
dirt, and debris.
Protection from water,
dirt, and debris.
NOTE:
• COM75 Adapter included.
• Maximum concrete slab depth for
RC3-LJB Series = 6.25" [158mm]
• For installations in the City of Chicago, install an EMT
compression fitting (not supplied) to the conduit system and
a junction box suitable for use in environmental air spaces, if
required, (not supplied). Complete installation per NEC and
local codes.
Maximum Allowable Copper Cross-Sectional Area:
RC3 Power Compartment only
= .01536 sq. in. [9.91mm
2
].
RC3 Each Communication Compartment only
= .0080 sq. in. [5.162mm
2
].
NOTE:
• COM75 Adapter included.
• Maximum concrete slab depth for
RC4-LJB Series = 6.25" [158mm]
• For installations in the City of Chicago, install an EMT
compression fitting (not supplied) to the conduit system and
a junction box suitable for use in environmental air spaces, if
required, (not supplied). Complete installation per NEC and
local codes.
Maximum Allowable Copper Cross-Sectional Area:
RC4 Power Compartment only
= .03072 sq. in. [19.821mm
2
].
RC4 Each Communication Compartment only
= .01600 sq. in. [10.323mm
2
].
NOTE: Modular Jacks sold
separately.
NOTE: Modular Jacks
sold separately.
Catalog Number Explanation
RC3ATCAL-LJB
RC3 A TC AL LJB
Identifies Identifies Identifies Identifies Color Identifies
Poke-Thru Assembled that Unit is of Cover Junction Box
Series Unit (A) or Approved for Assembly (Not Included)
Cover (C) Tile and (See below
Carpet Floors for details)
Catalog Number Explanation
RC4ATCAL-LJB
RC4 A TC AL LJB
Identifies Identifies Identifies Identifies Color Identifies
Poke-Thru Assembled that Unit is of Cover Junction Box
Series Unit (A) or Approved for Assembly (Not Included)
Cover (C) Tile and (See below
Carpet Floors for details)
Poke-Thru Devices on this page are available in some or all of the
following cover color options as indicated by the part numbers:
GY – Gray painted flange with gray nonmetallic cover,
BK – Black painted flange with black nonmetallic cover,
VY – Ivory painted flange with ivory nonmetallic cover,
AL – Brushed Aluminum flange with black nonmetallic cover
BS – Brushed Brass flange with black nonmetallic cover
AA –
Brushed Aluminum flange with aluminum-colored nonmetallic cover
AB – Brushed Brass flange with brass-colored nonmetallic cover
Where applicable, slide covers match the cover color.