Cut Sheet

ManualsBrandsWiremold ManualsConduitDuplex Device Plate, OFR48-2/OFR48-4 Boxes

WIREMOLD

OFR Series Overfloor Raceway

Multiple Services in a Low Profile Overfloor Raceway

n Lowest profile overfloor raceway available. Smaller,

narrower, lower raceway profile reduces potential trip hazards

while also being installer friendly to speed installations.

n Installs in open space areas. Provides power, communication,

and A/V wiring to areas where in-floor or ceiling distribution

are not accessible options.

n Multiple channel base. Four-channel raceway provides space

for multiple combinations of power, communication and A/V to

be provided through a single raceway installation.

n Black powder coat finish. Durable textured finish resists

scuffing and scratches and blends with most decors.

n Multiple options for communication and A/V connectivity.

OFR Series Raceway accepts Wiremold Open System device

plates that provide connectivity to a wide range of devices from

leading communication and A/V providers.

n Re-energize abandoned poke-thru holes. Brings a wide

variety of services to the work surface by re-using existing

openings from previous poke-thru installations.

n Attaches directly to floor covering. Works with carpet, tile,

wood, etc. so there is no need to remove or alter existing

floor coverings. Ideal for both temporary and permanent

installations.

n Multiple transition options. Transition fittings are available to

feed OFR Series Raceway from Wiremold DS4000

™

, 4000

and 2400 Series

™

wall-mounted raceway systems and also

from Vista Architectural Columns.

n Tamper-resistant system. Raceway cover is difficult to

remove without the proper tools, discouraging unwanted

access to raceway-provided services.

n Meets ADA Accessibility Guidelines. Low profile, unobtrusive

design meets the ADA Accessibility Guidelines that pertain

to ADA Standard 4.5 which addresses changes in floor and

ground surface levels.

n cETLus Listed.

FEATURES & BENEFITS

OFR Series Overfloor Raceway System provides

four-channels of capacity and access to a wide range

of power, communications, and A/V connectivity

options in the smallest, lowest, narrowest, ADA

compliant profile available in overfloor raceway

systems. This system installs over existing floor

coverings and is both tamper-resistant and installer-

friendly, making it an ideal solution for relocatable

or permanent installations where access through

floors and ceilings is not an option. There are also

transition fittings to feed OFR Series Raceway

from Wiremold wall-mounted raceway systems and

Vista Architectural Columns. OFR Series Raceway

accepts Wiremold Open System

device plates that

provide connectivity to a wide range of devices from

leading communication and A/V providers.

OFR Series Raceway provides access to power, A/V, and communication services to

open-space areas in an ADA compliant low profile design.

ED1647R8 – Updated January 2018 – For latest specs visit www.legrand.us/wiremold

OFR Series Raceway OFRPT3 Poke-Thru Transition Fitting.

OFR Series Overfloor Raceway transition fittings for 2400 Series Raceway

and through a wall.

Summary of content (8 pages)

PAGE 1
WIREMOLD® OFR Series Overfloor Raceway Multiple Services in a Low Profile Overfloor Raceway OFR Series Overfloor Raceway System provides four-channels of capacity and access to a wide range of power, communications, and A/V connectivity options in the smallest, lowest, narrowest, ADA compliant profile available in overfloor raceway systems.
PAGE 2
OFR Series Overfloor Raceway System Layout KEY OFRBC-8 OFR11 OFR48-2 OFR48-4 OFR10IW OFR89-4000 4000 4000 Overfloor Raceway Base & Cover 90° Flat Elbow Two-Gang Device Box Four-Gang Device Box In-Wall Entrance End Fitting 4000 Series Raceway Transition Fitting 4000 Series Raceway OFR10IW OFR89-4000 OFR48-4 OFR48-2 OFRBC-8 OFR11 OFR Series Overfloor Raceway Wire Fill Capacities for Power* WIRE SIZE O.D. THHN/THWN Inches (mm) 14 12 10 8 AWG AWG AWG AWG 0.111 0.130 0.164 0.216 (2.8) (3.
PAGE 3
OFR Series Overfloor Raceway System Ordering Information Catalog No./Item Description/Specifications Catalog No./Item OFRBC-8 Overfloor Raceway Base & Cover – Cover: 0.040" (1.0mm) steel. Base: 0.080" (2.0mm) aluminum. Durable black powder coat finish. Divided into four channels. Packed one (1) 8' (2.4m) length of base and cover per carton. 6 7/8" (175mm) OFR10A Overfloor Raceway Entrance End Fitting – Feeds OFR Series Raceway. Has two (2) concentric 1/2" and 1 1/4" trade size KOs on end.
PAGE 4
OFR Series Overfloor Raceway System Ordering Information Catalog No./Item Description/Specifications Catalog No./Item OFR89-2400 OFR 2400 Raceway Transition – For connecting vertical runs of 7 3/16" 2400 & 2400D Series Raceway (183mm) with OFR Series Raceway. Includes removable divider than can be positioned to feed any 2 9/16" raceway channel. 4" OFR11 OFR Flat Elbow – For making right angle turns on the 8 11/16" 8 11/16" same surface. (221mm) (221mm) 1/2" (12.
PAGE 5
OFR Series Overfloor Raceway System Ordering Information (continued) Catalog No./Item Description/Specifications Catalog No./Item OFR17 OFR Inside Elbow – For internal right angle turns of OFR Series Raceway. OFR47-B OFR Blank Device Plate – For covering unused compartments in OFR48-2 and OFR48-4 Device 2" Boxes.
PAGE 6
NOTES 6
PAGE 7
NOTES 7
PAGE 8
NOTES NOTE: All brand and product names referenced in this document are registered trademarks or trademarks of their respective holders. NOTE: The paper used to print this document is an environmentally responsible paper with 10% post consumer waste, with FSC and SFI Chain of Custody certifications, Lacey Act complaint. 100% of the electricity used to manufacture Flo sheets is generated with Green-e certified renewable energy. Electrical Wiring Systems 60 Woodlawn Street West Hartford, CT 06110 Phone: 1.