Cut Sheet

9
Catalog No./Item Description/Specifications
V4050* Device Mounting Bracket –
G4050* High impact plastic mounting
bracket and trim plate which
overlap raceway cover
providing a seamless
transition. For use with:
• 5507 Series Faceplates
• Ortronics
®
TracJack &
Series II Modules
• Pass & Seymour Activate
Series Inserts
• Wiremold Open System
Communication Modules
5507AD* Modular Furniture
Adapter –
• For mounting Pass &
Seymour Activate
modular furniture
bezel and other modular
furniture adapters.
5507B* Blank Faceplate – For covering
unused compartments in the
device bracket.
5507D* Duplex Faceplate –
For covering duplex
style devices.
• Accepts 106 Frame.
5507R* Rectangular Faceplate –
For covering rectangular
style devices.
5507S* Rectangular Spacer – For
mounting commercial device
plates. Installs between the
device bracket and a device.
5507SW* Switch Faceplate – For covering
standard toggle switches.
5507T1* Single Receptacle Faceplate –
For covering single receptacles –
1.59" [40.4mm] diameter.
5507T2* Single Receptacle Faceplate –
For covering single receptacles –
1.41" [35.8mm] diameter.
Catalog No./Item Description/Specifications
5507RJ* Dual RJ11/RJ45
Connector Faceplate –
• For mounting one or two
RJ type connectors – has
one opening and a KO for
the other.
5507FRJ* Flush Dual RJ11/RJ45
Faceplate – Same as
5507RJ except the
connectors are
recessed to provide a
flush installation.
5507-4TJ* Ortronics Faceplate –
For mounting Ortronics
datacom inserts.
• Accepts four
TracJack Devices.
5507-6TJ* Ortronics Faceplate –
For mounting Ortronics
datacom inserts.
• Accepts six
TracJack Devices.
V/G4050 & 5507 Series Faceplates
NOTE: All faceplates are 4 1/4" long x 1 11/16" wide [108mm x 43mm].
* Add “G” suffix to indicate gray finish.
Not for use with 4048BF and 4048RF Device Covers.
ORT
P&S
OPEN
ORT
P&S
OPEN
ORT
P&S
OPEN
ORT
P&S
OPEN
Catalog No./Item Description/Specifications
CM-EPLA* End Plates – Includes two
outlet identification labels with
clear covers and two matching
screw covers. Required for
mounting Pass & Seymour Activate
and Wiremold Open System
communication modules into
4050 Series device brackets.
S2-EPL* End Plates – Includes two
outlet identification labels with
clear covers and two matching
screw covers. Required for
mounting Ortronics Series II
modules into 4050 Series
device brackets.
Datacom Endplates
4 11/16"
[119mm]
6"
[152mm]
7/16"
[11.1mm]
ORT
P&S
OPEN
ORT
P&S
OPEN
ORT
P&S
OPEN