Cut Sheet

6
Features Standard Options
Communication Devices Ortronics or Activate Connectivity Other manufacturers
System Devices
Electrical Devices Pass & Seymour Other manufacturers and some International devices
Body Length Longest = 10' [2.54m], shortest = 1' [305mm] —
Installation Surface mounted —
Finish Baked enamel finish Standard colors of baked powder epoxy or
custom colors
Wire Type THHN stranded Options per specification
Wiring Splices Insulation displacement connectors Continuous wiring or twist-on wire connector
Grounding Conductors Wire gauge per National Electrical Oversized and/or separate grounding wires
Code (NEC) and shared grounding wires
Device Identification Gray self-adhesive polyester label Self-adhesive engraved nameplate,
with black letters Interlink labeling software for communication
devices available
Neutrals Shared neutral Oversized and/or separate neutral wires
Pigtails 12" [305mm] feeds and receptacle leads Per specification
Conduit Feeds Raceway drilled at job site Entrance end cap
Device Mounting Steel plates —
Record Drawings Three sets and two copies of Per job requirements
marked-up blueprints
Submittal Services Detailed submittal Submittal free
3000 Series Prewired Raceway Features
Device and Raceway Labeling Detail for Prewired Applications
■ Device labeling is available in the following materials:
Gray self-adhesive polyester label with black
lettering (standard).
Other color self-adhesive polyester labels.
Engraved phenolic nameplates with adhesive backing.
■ The back of the raceway is labeled with the raceway
number and the room or area number(s).