Cut Sheet

Catalog No./Item Description/Specifications
G3033JE
mm
Single Receptacle Cover –
V3033JE
mm
For installing of commercially
available straight blade and locking
single receptacle with face
diameters of 1.56-1.57" [39.6-
40mm]. G3007C Device
Bracket included.
G3036HE
mm
Blank Cover – Cover has
V3036HE
mm
1/2" trade size KO
in center. G3007C Device
Bracket included.
G3040CE Switch Cover – For installing
V3040CE commercially available single-
pole, two-pole, three-way or
four- way switches. G3007C
Device Bracket included.
4 1/2"
[114mm]
4 1/2"
[114mm]
4 1/2"
[114mm]
1 37/64"
[40mm] Dia.
5
Catalog No./Item Description/Specifications
V3017TCE Internal Corner Coupling – For
G3017TCE surfaces at right angles, or for use
as a straight-through fitting. Solid
leg of base has concentric 1/2"
and 3/4" trade size KO.
Wire capacity when used as a straight through fitting.
G3018AE External Corner – For right angle
V3018AE turns around external corners.
G3027AE
mm
Single Receptacle Cover – For
V3027AE
mm
installing commercially available
straight blade and locking single
receptacles with face diameters
of 1.38-1.40" [35.1-35.6mm].
G3007C Device Bracket included.
G3028 Utility Box – Cover has twistouts
V3028 on four sides. May be used as a
tee, cross, junction box, or for
branch circuit extensions. Base
has five 1/2" trade size KOs and
four holes for fixture stud.
4 1/2"
[114mm]
6 3/8"
[162mm] sq.
1 7/8"
[48mm]
1 13/32"
[40mm] Dia.
3000 Raceway Fittings
(continued)
2 3/4"
[70mm]
4"
[102mm]
1 1/4"
[32mm]
#6 AWG #8 AWG #10 AWG #12 AWG #14 AWG
THNN, THWN 13 18 24 55 75
mm
Add C prefix to denote Canadian version – CSA certified.
3000 Series Ordering Specifications for Prewired Applications
1. Detailed Submittal The detailed submittal will show exactly how each
raceway run will be built including lengths, number and
type of receptacles, wiring schematics, circuiting
information, etc. The contractor and/or distributor must
review, clarify any information not clearly indicated on
the drawings or specs, approve and return to the
factory before production can begin.
2. Submittal Free The Wiremold Prewired XPress
SM
Building Plan Checklist
is filled out by the contractor or distributor and sent
along with plans, casework and specs to the factory. No
submittal is required and the project is scheduled for
production upon receipt of all necessary information.
Two options available when ordering a prewired job:
3000 Series Raceway shown
electrically prewired.