Cut Sheet

Catalog No./Item Description/Specifications
V3010AE Entrance End – For connecting
G3010AE to 1/2" conduit and armored cable
connectors. 1/2" trade size KO on
end and each side. May be
connected to conduit boxes by
using 1/2" [12.7mm] chase nipple.
(not included)
G3010B Blank End – For closing open
V3010B end of 3000 Series Raceway. Has
concentric 1/2" and 3/4"
trade size KOs.
G3010C Entrance End – For connecting
V3010C to rigid or flexible conduit.
Concentric 1/2", 3/4", and 1"
trade size KOs on end and
each side.
G3011E 90° Flat Elbow – For right angle
V3011E turns on same surface.
G3014C Wall Box Connector – For
V3014C connecting from flushed-in
wall box.
G3015E Tee – For branches at right angles.
V3015E Couplings furnished.
Catalog No./Item Description/Specifications
G3046QOU Circuit Breaker Housing– For
V3046QOU mounting Square D Type QOU
one-, two-, or three-pole breakers
rated up to 50A maximum.
Wire capacity of 3000 Raceway with 3046KD, KTSQ, QOU
circuit breaker housings.
G3048R Rectangular Receptacle
V3048R Cover – For installing
commercially available 15A
and 20A rectangular
receptacles. G3007C
Device Bracket included.
• Accepts Decorator style
communication devices
G3051LE m Extension Cover – Accepts
V3051LE
m shallow-type 30A and 50A
devices and flush plates.
Deeper devices can be
accommodated with a
combination of 3051LE and
any of the V5700 Series
single-gang, open base boxes.
G3007C Device Bracket included.
• Accepts standard single-
gang faceplates.
G3082 Conduit Connector – To
connect end of 3000 Series
Raceway with 1 1/2" trade size
conduit or armored cable.
G3008C C-Hanger – For suspending 3000
Series Raceway from structural
ceiling. Designed for use with 3/8"
[9.5mm] threaded rod. Use one
hanger at least every
5 feet [1.5m] of length.
4 1/8"
[105mm]
5 5/16"
[135mm]
1 7/16"
[37mm]
3 7/16"
[87mm]
2 3/4"
[70mm]
1 3/8"
[35mm]
5/8"
[16mm]
1 3/8"
[35mm]
5/8"
[16mm]
7 3/8"
[187mm]
1 13/16"
[46mm]
4 1/2"
[114mm]
2 5/8"
[67mm]
1 5/16"
[33mm]
4 1/2"
[114mm]
2 11/16"
[68mm]
2 13/16"
[71mm]
2 7/8"
[73mm]
2"
[51mm]
#6 AWG #8 AWG #10 AWG #12 AWG #14 AWG
THNN, THWN 6 8 10 18 26
4
mm
Add C prefix to denote Canadian version – CSA certified.
3000 Raceway Fittings
(continued)
2 1/8"
[54mm]
2"
[51mm]
1"
[25mm]
1 3/8"
[35mm]
1 1/16"
[27mm]
4 1/4"
[108mm]
6" [152mm]
ea. leg
4"
[102mm]
ea. leg
8"
[203mm]
2 7/8"
[73mm]
8"
[203mm]
10 1/4"
[260mm]
2 1/8"
[54mm]
11/16"
[17.5mm]
1 7/8"
[48mm]
ORT
P&S
OPEN
ORT
P&S
OPEN