Cut Sheet

Catalog No./Item Description/Specifications
G3000WC Wire Clip (Plated) – For holding
conductors in place.
G3001 Coupling (Galvanized Steel
Unpainted) – For joining lengths
of 3000 Series Raceway.
G3001A Rigid Inside Coupling
(Galvanized Steel Unpainted) –
For joining lengths of 3000 Series
Raceway when added rigidity is
required, i.e. raceway
suspended overhead.
G3003 Supporting Clip – For supporting
lengths of 3000 Series Raceway
at any point. Mount with #8 flat
head fastener. Has set screw for
locking to raceway.
G3006E/V3006E Cover Clip – For covering
uneven cut joint of 3000 Series
Raceway Cover.
G3007C m Device Bracket – For mounting
standard single-gang devices
(with 3.3" [83.82mm] mounting
straps), Activate Connectivity
inserts and faceplates. Can be
used with commercially available
flush plate (not furnished).
1"
[25mm]
2 1/4"
[57mm]
6"
[152mm]
3/4"
[19.1mm]
2 13/16"
[71mm]
2 13/16"
[71mm]
3/4"
[19.1mm]
3 9/32"
[83mm]
4 1/2"
[114mm]
3
Catalog No./Item Description/Specifications
G3043BE
m Duplex Receptacle Cover –
V3043BE
m For installing commercially
available 15A and 20A duplex
receptacles. G3007C Device
Bracket included.
• Accepts 106 Frame.
G3043GE m Duplex Grounding Receptacle
V3043GE
m and Cover – Same as 3043BE
except with 15A/125V
(NEMA 5-15R) grounding
receptacle furnished. G3007C
Device Bracket included.
G3044-2 m Extra Deep Switch and
V3044-2
m Receptacle Box – Two-gang.
For standard 30, 50, and 60A
receptacles. Two sides of cover
have one set of combination
twistouts for 3000 and 2100 Series
Raceway: two sides have two sets.
Rectangular hole-cut in cover:
3 3/4" x 2 7/8" [95mm x 73mm].
Base has 1" and 1 1/2"
trade size concentric KOs.
G3046BE m Duplex Receptacle Cover –
V3046BE
m For installing commercially
available 15A and 20A
duplex receptacles.**
• Accepts 106 Frame.
G3046H-2 Tap-Off Fitting – Has concentric
V3046H-2 1/2" and 3/4" trade size KOs and
twistout for telephone cables.
Grommet furnished for
telephone KO.
V3046KD Circuit Breaker Housing – For
G3046KD covering single pole breaker.
Remove KO for two-pole.
G3046KTSQ/ Circuit Breaker Housing – For
V3046KTSQ mounting Square D Quik-Gard
QOB bolt-on circuit breakers
rated up to 50A maximum.
Furnished with Square D QON3B
compact base for single to
Three-pole circuit breakers. For
GFI breakers, use Square D
QOB-GFI Series.
3000 Raceway Fittings
6"
[152mm]
1 15/16"
[49mm]
7 3/8"
[187mm]
2 3/4"
[70mm]
4 1/2"
[114mm]
4 1/2"
[114mm]
2 3/4"
[70mm]
6 3/8"
[162mm]
2 7/8"
[22mm]
3 3/4"
[95mm]
4 3/4"
[121mm]
5 3/8"
[137mm]
m Add C prefix to denote Canadian version – CSA Certified.
** These covers are designed for installations which may be subjected
to unusual mechanical strain or vibration.
ORT
P&S
OPEN
ORT
P&S
OPEN