Cut Sheet

Catalog No./Item Description/Specifications

WPACR-1G (Shown) Internal Bracket – Two duplex receptacle brackets,

receptacle insulators, power grommets, and bend

radius control grommets. For use with recessed

activations. Communication brackets ordered

separately. See next page.

WPACR-2G Internal Bracket – Two 15A, 120V duplex receptacles,

two duplex receptacle brackets, receptacle insulators,

power grommets, and bend radius control grommets.

For use with recessed activations. Communication

brackets ordered separately. See next page.

WPACR-3G Internal Bracket – Two 20A, 120V duplex receptacles,

two duplex receptacle brackets, receptacle insulators,

power grommets, and bend radius control grommets.

For use with recessed activations. Communication

brackets ordered separately. See next page.

FloorPort Activation Accessories for Use with Walkercell and Walkerdeck Systems

DTB-2-2A (Not Included)

Bend Radius Grommet

Catalog No./Item Description/Specifications

PKGRBR PK Preset Grommet – Bend radius

control grommet used with PK preset.

Maintains 1 1/4" (32mm) minimum

cable lay-in radius.

Bend Radius Control Grommets

NOTE: Not for use with communication

brackets DTB-2-2AB or DTB-2-2RT.

COVER ACTIVATION BARRIER COMMUNICATION

ASSEMBLY ASSEMBLY ASSEMBLY BRACKET

FPBTC

FPCTC

FPBT (1) WPACR — (2) DTB-2

FPCT

FPFFTC (1) PKKIT (1) DTB-2FP

FPFFT

Fittings intended for a cellular raceway system must have a minimum of 2 1/2" (64 mm) of concrete topping

over the top of the deck. A typical UL Fire Classified floor activation will consist of the following components:

FloorPort Bracket Compatibility

PK Series Preset Inserts

“( )” Maximum Quantity of Units Allowed Inside of Preset Insert

Country of Origin: USA