Installation Manual

2
2. INSTALLING GASKET (All Flanged): Place
G
asket onto the underside of the Trim Ring.
2a. Flanged Carpet Installation: Installation view of
r
ound Gasket and Carpet.
2b.Flanged Tile Installation – FLUSH: Place flat Gasket
under Trim Ring prior to positioning on Concrete.
2c. Flanged Tile Installation – SURFACE: Place flat Gasket
under Trim Ring prior to positioning over Tile.
3. ATTACHING THE COVER (Flanged): Slide sealing
Washer over Attachment Screw and mount Flange
to Fitting.
4a. ATTACHING THE COVER (Flangeless): Thread adjusting
screws into preset or floor box and place nylon shoulder
washers on screws. Position flange on top and use a slotted
screwdriver to adjust flange elevation flush with floor surface.
Round
Gasket
Flange
C
arpet
F
lat
G
asket
Flange
Apply Grout or
Silicone Compound
at Joint
T
ile (1/8"
[
3.2mm])
Flat
Gasket
F
lange
Tile
Attachment
Screw (4X)
Sealing
Washer
#8 Hold-Down
Screw
Beveled
Washer
Nylon Shoulder
Washer
Slotted Adjusting
Screw
5/32