Installation Manual

3
Step 4. Install outlet covers Step 5. Attach cover plate using Step 7. Finished product.
and rear cover. the screw provided.
NOTE: If communication is required
connect necessary wires to
communication jacks and
snap into opening provided
in faceplate.
Installing FIT-EXT
to Standard FIT Stem
Step 1. Loosen connector and Step 2. Line up extension and Step 3. Slide conduit pipe into
slide conduit pipe out. slide onto conduit pipe upper part of stem and
tightening the screw installation is complete.
once in place.
NOTE: Make sure to line up divider in
conduit while tightening screws.