Cut Sheet

6
Catalog No./Item Description/Specifications
FPB-B Faceplate – Two-gang, blank.
FPSS-SS Faceplate – Two-gang
with two surge suppression
device openings.
FPB-ACT Faceplate – Two-gang. Includes
one (1) Pass & Seymour
®
Activate
adapter. Wiremold Open System
inserts sold separately.
FPB-RT Faceplate – Two-gang. Includes
one (1) Ortronics
®
TracJack adapter
and one (1) Series II adapter
included.
Flat connector only.
FPACT-ACT Faceplate – Two-gang. Includes
two (2) Pass & Seymour
®
Activate
adapters. Wiremold Open
System inserts sold separately.
FPB-2RT Faceplate – Two-gang. Includes
two (2) Ortronics
®
TracJack
adapters and two (2). Series II
adapters. Flat connector only.
With the FIT Series, service heads can also be custom built. Combining a housing and base with individual faceplates allows
the flexibility to custom design a service fitting to specific job requirements. One housing and base, as well as two faceplates,
must be ordered to make a complete service head. These catalog numbers do not include receptacles. Example: To order a
241 Series Service Head with one blank faceplate and one faceplate with two duplex receptacle openings, order the following:
1 pc. 241H/BTC Housing and Base. Barrier included
(may not be needed for single service applications).
1 pc. FPB-B Two-gang plate – Blank.
1 pc. FP2R Two-gang plate with two duplex openings.
FIT 241 Series Service Head Components
Catalog No./Item Description/Specifications
241-H/BTC Housing and Base – Double width. For 241 Series Service Head. Barrier included (may not
be needed on single service applications). Base has opening for connection to FIT insert.
Also includes scrub water gasket.
241 Series Housing and Base Order Information
Catalog No./Item Description/Specifications
FP1.390-1.390 Faceplate – Two-gang
with two 1.390" (35.3mm)
receptacle openings.
FP1.562-1.562 Faceplate – Two-gang
with two 1.562" (39.7mm)
receptacle openings.
FP2R Faceplate – Two-gang
with two duplex
receptacle openings.
FP2T Faceplate – Two-gang
with two telephone
openings. Communication
grommets included.
FP50-50 Faceplate – Two-gang with
two 1/2" trade size knockouts.
FP75-50 Faceplate – Two-gang
with one 3/4" and one 1/2"
trade size knockout.
FP75-75 Faceplate – Two-gang with
two 3/4" trade size knockouts.
241 Series Faceplate Order Information
9"
(229mm)
2 1/2"
(64mm)