Cut Sheet

5
Catalog No./Item Description/Specifications
FIT 2" (51mm) Poke-Thru Insert With Junction Box Assembly –
1" trade size barriered conduit. Also includes BX/MC cable connector.
NOTE: Must be activated with 200 Series or 241 Series Service Head and FIFP or
FP Series Faceplates (sold separately) to maintain UL Listing and/or Classification.
FIT Series Ordering Information
15 1/2"
(394mm)
With the FIT Series, service heads can also be custom built. Combining a housing and base with individual faceplates allows
the flexibility to custom design a service fitting to specific job requirements. One housing and base, as well as two faceplates,
must be ordered to make a complete service head. These catalog numbers do not include receptacles. Example: To order a
200 Series Service Head with one blank faceplate and one Decora style opening faceplate, order the following:
1 pc. 200-H/BTC Housing and Base. Barrier included (may not be needed for single service applications).
1 pc. FIFP-B Single-gang plate - blank.
1 pc. FIFP-SS Single-gang plate with one Decora opening.
FIT 200 Series Service Head Components
Catalog No./Item Description/Specifications
200-H/BTC Housing and Base – Single width. For 200 Series Service Head. Barrier included
(may not be needed on single service applications). Base has a 3/4" trade size
knockout for connection to FIT insert. Also includes scrub water gasket.
200 Series Housing and Base Order Information
Catalog No./Item Description/Specifications
FIFP-1.390 Faceplate – Single-gang
with one 1.390" (35.3mm)
receptacle opening.
FIFP-1.562 Faceplate – Single-gang
with one 1.562" (39.7mm)
receptacle opening.
FIFP-B Faceplate – Single-gang, blank.
FIFP-R Faceplate – Single-gang with
one duplex receptacle opening.
Catalog No./Item Description/Specifications
FIFP-SS Faceplate – Single-gang
with one 1.390" (35.3mm)
receptacle opening.
FIFP-T Faceplate – Single-gang
faceplate with one telephone
opening. Communication
grommets included.
FIFP50 Faceplate – Single-gang with
one 1/2" trade size knockout.
FIFP75 Faceplate – Single-gang with
one 3/4" trade size knockout.
200 Series Faceplate Order Information
4 5/8"
(118mm)
1 7/8"
(48mm)