Cut Sheet

ManualsBrandsWiremold ManualsBoxes & EnclosuresSGL GANG PLATE BLANK

WIREMOLD

Pedestal Style Poke-Thru Devices

High Capacity Multiservice Power &

Communication Poke-Thru Devices

Pedestal Style Poke-Thru Devices are an ideal solution for

bringing large capacity power and communication services to

workstations in an open space, above-grade floor environment.

Every Wiremold Pedestal Poke-Thru Device comes with built-

in TopGuard protection, an industry-leading design that meets

and exceeds UL scrub water exclusion requirements for tile and

carpet floors. Topguard protection prevents water, dirt, or debris

from entering the power and communication compartments

located below the floor, through the service head or floor fittings.

All Wiremold Pedestal Poke-Thru Devices can be

installed on tile, carpet, or wood covered floors. Each of

these devices provides an excellent solution for both new

or retrofit construction, with typical applications that include

commercial office buildings, financial institutions, and

government facilities.

FEATURES & BENEFITS

n Available in single- or double-width service heads.

Greater flexibility and capacity to meet customer power and

communication requirements with lower initial cost.

n RC91GHBTC/RC92GHBTC Series provides a combination

of one 1 1/4" and one 1/2" trade size conduit stem. Allows

additional space to accommodate communication cables.

n FIT Series provided with one 1" trade size divided conduit

stem. Allows for dual service capability.

n Variety of faceplate configurations available. Flexibility to

configure service fittings to meet workstation requirements

now and in the future, reducing overall life cycle costs.

n FIT Series is fire-rated for up to 4-hour rated floors. The

RC91GHBTC and RC92GHBTC are fire-rated for up to

2-hour fire-rated floors.

Maintains the 2- or 4-hour fire

rating of the floor.

n “Step-on-it” installation. Quick and easy installation without

the need for additional fasteners or a second installer.

n TopGuard Protection. Integral design component that

prevents water, dirt and debris from entering power and

communication compartments. Whenever you see the

TopGuard protection icon on

any Wiremold product, you’ll

know it meets and exceeds UL scrub water exclusion

requirements for tile and carpet floors.

n Datacom connectivity options. Accepts industry standard

and proprietary devices from a wide range of manufacturers

to provide a seamless and aesthetically pleasing interface for

voice, data, audio, and video applications at the point-of-use.

n UL Listed and UL Fire Classified to U.S. and Canadian

safety standards for tile and terrazzo. Includes the new

UL requirements under UL514A and UL 514C for the scrub

water exclusion test for carpet and wood covered floors.

ED1217R7 – Updated April 2017 – For latest specs visit www.legrand.us/wiremold

FIT with 241 Series Service Head on carpet floor.

RC9GHBTC Pedestal Poke-Thru Device on tile floor.

Protection from

water, dirt,

and debris.

Download this product’s PEP ecopasport

environmental product declaration at

www.legrand.us/resources-and-downloads.

This declaration conforms with ISO 14025 and

14040 and is in alignment with EN 15804.

Summary of content (12 pages)

PAGE 1
WIREMOLD® Pedestal Style Poke-Thru Devices High Capacity Multiservice Power & Communication Poke-Thru Devices Pedestal Style Poke-Thru Devices are an ideal solution for bringing large capacity power and communication services to workstations in an open space, above-grade floor environment. Every Wiremold Pedestal Poke-Thru Device comes with builtin TopGuard protection, an industry-leading design that meets and exceeds UL scrub water exclusion requirements for tile and carpet floors.
PAGE 2
Pedestal Style Poke-Thru Device Specifications 2" Diameter Hole FIT Series FIT Series Single Width 200H/BTC Service Head Double Width 241H/BTC Service Head Four (4) Hours Four (4) Hours TopGuard™ TopGuard™ Three (3) #12 AWG .01536 Sq. in. (9.91 mm2) Seven (7) #12 AWG .03584 Sq. in. (23.12 mm2) COMMUNICATIONS* Fifteen (15) Cat 6/Channel .05020 Sq. in. (32.39 mm2) Fifteen (15) Cat 6/Channel .05020 Sq. in. (32.
PAGE 3
FIT Series Poke-Thru Specifications Copper Cross Section: The copper cross-sectional area determines the amount of wire fill capacity in a poke-thru device. Unlike other wire and cable management systems that utilize wire fill capacity, a poke-thru device is UL tested under fire conditions to determine the maximum amount of copper conductors that will pass through a poke-thru device, while maintaining the fire-rating of the concrete slab.
PAGE 4
RC91GHBTC & RC92GHBTC Series Specifications Copper Cross Section: The copper cross-sectional area determines the amount of wire fill capacity in a poke-thru device. Unlike other wire and cable management systems that utilize wire fill capacity, a poke-thru device is UL tested under fire conditions to determine the maximum amount of copper conductors that will pass through a poke-thru device, while maintaining the fire-rating of the concrete slab. The Multiservice Series is UL Classified to U.S.
PAGE 5
FIT Series Ordering Information Catalog No./Item Description/Specifications FIT " (51mm) Poke-Thru Insert With Junction Box Assembly – 2 1" trade size barriered conduit. Also includes BX/MC cable connector. 15 1/2" (394mm) NOTE: M ust be activated with 200 Series or 241 Series Service Head and FIFP or FP Series Faceplates (sold separately) to maintain UL Listing and/or Classification. FIT 200 Series Service Head Components With the FIT Series, service heads can also be custom built.
PAGE 6
FIT 241 Series Service Head Components With the FIT Series, service heads can also be custom built. Combining a housing and base with individual faceplates allows the flexibility to custom design a service fitting to specific job requirements. One housing and base, as well as two faceplates, must be ordered to make a complete service head. These catalog numbers do not include receptacles.
PAGE 7
FIT Series Poke-Thru Accessories Order Information Catalog No./Item Description/Specifications Catalog No./Item AP-FITTC Poke-Thru Abandonment Plate – 2" (51mm). Description/Specifications FITPLUG-C Fire-Rated Plug – For carpet applications. NOTE: S tem must remain in cored hole. FIT-EXT Assembled Extension – 4 5/8 (118mm). Includes 1" trade size barriered conduit and coupling. For use with slabs greater than 8" (203mm). FITPLUG-T Fire-Rated Plug – For tile applications.
PAGE 8
F F RC91GHBTC Poke-Thru Series Ordering Information Catalog No./Item Description/Specifications Catalog No./Item RC91GHBTC Poke-Thru Insert and Single Width Service Head – Includes insert stem with disposable plate and service head with housing, base, scrub water gasket, and barrier. Service head and insert install together to make a poke-thru assembly. Combine with faceplates (sold separately) to complete service head assembly.
PAGE 9
F RC92GHBTC Poke-Thru Series Ordering Information Catalog No./Item Catalog No./Item Description/Specifications RC9FFS Insert Stem with Disposable Plate – Furniture feed insert with one 1 1/4" and one 1/2" trade size conduit to feed power and communication services. Use with either 291-H/BTC or 292-H/BTC Service Head to form complete unit. NOTE: P art shown assembled. Service head is shipped unassembled with the insert stem.
PAGE 10
F F RC92GHBTC Series Faceplate Ordering Information (Continued) Catalog No./Item Description/Specifications Catalog No./Item FPACT-ACT Two-Gang Faceplate – Includes two (2) Pass & Seymour® Activate adapters. Wiremold Open System inserts sold separately. Description/Specifications FPB-ACT Two-Gang Faceplate – Includes one (1) Pass & Seymour® Activate adapter. Wiremold Open System inserts sold separately. FPB-2RT Two-Gang Faceplate – Includes two (2) Ortronics® TracJack adapters and two (2) .
PAGE 11
F RC91GHBTC & RC92GHBTC Series FPoke-Thru Ordering Information For a Single Width Service Head Application: For a Double Width Service Head Application: 1. Order the RC91GHBTC Poke-Thru Fitting and Service Head: 1. Order the RC92GHBTC Poke-Thru Fitting and Service Head: NOTE: Service head is shipped unassembled. NOTE: Service head is shipped unassembled. 2. Order two faceplates: 2. Order two faceplates: 1 7/8" (48mm) 4 5/8" (118mm) FIFP-1.
PAGE 12
NOTES NOTE: All brand and product names referenced in this document are registered trademarks or trademarks of their respective holders. NOTE: The paper used to print this document is an environmentally responsible paper with 10% post consumer waste, with FSC and SFI Chain of Custody certifications, Lacey Act complaint. 100% of the electricity used to manufacture Flo sheets is generated with Green-e certified renewable energy. Electrical Wiring Systems 60 Woodlawn Street West Hartford, CT 06110 Phone: 1.