Cut Sheet

4
Catalog No./Item Description/Specifications
EFB6S 6-Gang Floor Box – has been designed to be installed in concrete floors, raised
f
loors, & wood floor applications. Box has a fully finished interior to assist plugging
and unplugging of devices. Designed to work with standard size wall plates.
Box comes complete with all components needed for initial installation.
Box is compatible with Wiremold
®
Walkerflex Modular Wiring System.
Custom options are available upon request.
Evolution Series EFB6 Floor Box Ordering Information
Three (3) KOs:
Outer: 1 1/4" Trade Size KO
Inner: 3/4" Trade Size KO
Two (2) KOs:
Outer: 2" Trade Size KO
Inner: 1" Trade Size KO
Two (2) KOs:
1" Trade Size KO
Two (2) KOs:
1" Trade Size KO
Four (4) 1" Trade Size KOs
Three (3) KOs:
Outer: 1 1/4" Trade Size KO
Inner: 3/4" Trade Size KO
3.7/8"
[99mm]
EFB6S Depth Behind Plates
NOTE: For use on bare (polished) concrete
or terrazzo floors EFB610-CTR
must be used. (Sold separately.)
11 3/16"
[284mm]
1
5 1/8"
[
384mm]
4
1/16"
[
103mm]
Components Included:
A Protective/Disposable Cover
B Tunnel System for connecting the
two modules of compartments
C Two (2) Removable Modules
D Two (2) Toggle Clamps to secure
box to raised and wood floors
E Two (2) Cable Management Guides
F Two (2) Leveling Support Legs for
concrete applications
G Trade Size Knockouts ranging in
size from 3/4" to 2" trade size
H Two (2) “L” Brackets
Items not included with the
box and sold separately:
• Receptacles,
• Communication Jacks
• A/V Devices
• Device plates.
EFB6S Knockout locations & Sizes
EFB6S Exploded View
A
B
C
D
E
F
H
C
Each Module Consists of:
• One (1) EFB6S-MB Mounting Bracket
• One (1) Back Plate
• Two (2) End Caps
• One (1) EFB6S-DIV Divider
• Three (3) 3/4"/1 1/4" Concentric
Knockout Plate