Cut Sheet

19
Catalog No./Item Description/Specifications
EFB610BTBK Flush Style Cover with
E
FB610BTGY Solid Lid – Die cast aluminum
EFB610BTBS cover assembly designed to be
EFB610BTNK used on top of floor covering.
EFB610BTBZ Available in the following powder
coated finishes: black (BK), gray
(GY), brass (BS), nickel (NK) and
bronze (BZ). For use on Evolution
Series 6-, 8- and 10-gang floor
boxes (EFB6, EFB8 and EFB10).
EFB610CTR Bare Concrete/Terrazzo
Trim Ring – Nonmetallic ring for
use with bare concrete and
terrazzo floor applications.
EFB610-TS Tile Shim – Used for floor
coverings greater than 3/16"
[4.7mm]. The EFB610-TS allows
the finished cover assembly to
be flush with the finished floor.
Includes one (1) 1/16" [1.6mm],
one (1) 1/8" [3.2mm] and one
1/4" [6.4mm] tile shims for 7/16"
[11.1mm] of upward adjustment.
EFB-Template Floor Box Template – Designed
to help mark out floor to insure a
proper fit.
Catalog No./Item Description/Specifications
EFB610CTCBK Surface Style Cover with
E
FB610CTCGY Carpet Insert – Die cast aluminum
EFB610CTCBS cover assembly designed to be
EFB610CTCNK used on top of the floor covering.
EFB610CTCBZ Available in the following powder
coated finishes: black (BK), gray
(GY), brass (BS), nickel (NK) and
bronze (BZ). For use on Evolution
Series 6-, 8- and 10-gang floor
boxes (EFB6, EFB8 and EFB10).
EFB610CTBK Flush Style Cover with
EFB610CTGY Carpet Insert – Die cast aluminum
EFB610CTBS cover assembly designed to be
EFB610CTNK used level (flush) with finish floor
EFB610CTBZ covering. Available in the following
powder coated finishes: black (BK),
gray (GY), brass (BS), nickel (NK)
and bronze (BZ). For use on
Evolution Series 6-, 8- and 10-
gang floor boxes (EFB6, EFB8
and EFB10).
EFB610BTCBK Surface Style Cover with
EFB610BTCGY Solid Lid – Die cast aluminum
EFB610BTCBS cover assembly designed to be
EFB610BTCNK used on top of floor covering.
EFB610BTCBZ Available in the following powder
coated finishes: black (BK), gray
(GY), brass (BS), nickel (NK) and
bronze (BZ). For use on Evolution
Series 6-, 8- and 10-gang floor
boxes (EFB6, EFB8 and EFB10).
Evolution Series Floor Box Accessories Ordering Information
NOTE: Depth of recess area in
plate is 1/4" [6.35mm].
NOTE: Depth of recess area in
plate is 1/4" [6.35mm].
1
6 3/8"
[
416mm]
12 1/2"
[318mm]
1
6 3/8"
[416mm]
12 1/2"
[318mm]
16 3/8"
[416mm]
12 1/2"
[318mm]
1
6 3/8"
[
416mm]
1
2 1/2"
[
318mm]
16 3/8"
[416mm]
12 1/2"
[318mm]
Evolution Series Floor Box Covers are available in powder coated
finishes of: (L to R) gray, nickel, bronze, brass and black.
CATALOG MAXIMUM LOAD
NUMBERS IN POUNDS
EFB610BTC Series 1800
EFB610CTC Series 1800
EFB610BT Series 1800
EFB610CT Series 1800
Load Capacities for Evolution Series
Floor Box Cover Assemblies
NOTE: Load applied through a 3" [76mm]
mandrel in center of the cover.
Loads above are static loads only and
do not pertain to rolling loads.
NOTE: Ring must be
attached to the floor
box before pouring
concrete or terrazzo.