Cut Sheet

55
Catalog No./Item Description/Specifications
DSDWNU-DV Downward Extron
®
MAAP
DSDWNU-BK Device Plate – Accepts two
DSDWNU-DG Extron
®
Electronics MAAP single
space modules.
DS4075-DV Small Obstacle/Transition
DS4075-BK Fitting – For passing over previously
DS4075-DG installed conduits or raceways up
to 2400 Series Raceway, or for
transitioning to 500 Series
™
, 700
Series
™
or 2400D Series
™
Raceway.
DS4075A-DV Offset Fitting – For use on wall
DS4075A-BK offsets or column depths up to
DS4075A-DG 9" [229mm].
DS4089-DV Adapter to 4000 Series Raceway –
DS4089-BK For transitioning in-line from
DS4089-DG DS4000 Series Raceway to
4000 Series Raceway.
DSTRK Tamper-Resistant Kit – Includes
25 screws and bit to secure fitting
covers to DS4000B Raceway Base.
640DS DS4000C Cutter – Portable cover
cutter provides clean square cuts
for DS4000C Raceway Cover.
650RT Fitting Cover Removal Tool –
Allows for easy removal of all
installed DS4000C Raceway Covers
without damaging finish.
DVWE-S Spray Paint – Used to touch up
DGWE-S large areas.
BKWE-S
DVWE-P Touch-Up Paint Pen – Used to
DGWE-P touch up small areas.
BKWE-P
Catalog No./Item Description/Specifications
DS4006B-DV Half Seam Clip/Blank Faceplate –
DS4006B-BK For covering seams where two
DS4006B-DG sections of DS4000C Cover come
together. Can also be used as a
b
lank faceplate.
DSDWND-DV Downward Duplex Device Plate –
D
SDWND-BK For 15A and 20A duplex receptacles
DSDWND-DG or 106 style data frames.
DSDWNDQ-DV Downward Duplex Device Plate
DSDWNDQ-BK w/One Duplex Installed – Includes
DSDWNDQ-DG one Pass & Seymour 20A duplex
receptacle with 6" [152mm]
wire leads installed on bracket.
• Ortronics Series II
DSDWNR-DV Downward Decorator Device
DSDWNR-BK Plate – For 15A and 20A duplex
DSDWNR-DG receptacles, GFCI and Surge
devices, or 106 style data frames.
DSDWNX Crossover Kit – Includes enclosures
for power or data crossover.
DSDWNS-DV Downward Ortronics
®
Series II
DSDWNS-BK Device Plate – Accepts one
DSDWNS-DG Ortronics
®
Series II module.
I
DS4000 Series Raceway Ordering Information (continued)
6"
[152mm]
6"
[152mm]
13 7/8"
[352mm]
11 1/2"
[292mm]
5 3/4"
[146mm]
6"
[152mm]
6"
[152mm]
NOTE: “-DV” suffix indicates Designer Ivory color, “-DG” suffix
indicates Designer Gray color and “-BK” suffix indicates
Matte Black color.
NOTE: Can only be shipped via
ground transportation.