Installation Manual

Catalog No./Item Description/Specifications
C
M-EPLA* End Plates – Includes two outlet identification labels with clear covers and two
matching screw covers. Required for mounting Pass & Seymour
®
Activate
™
and
Wiremold Open System communication modules into 4050, 5450, 5550,
2344SD-2A, 2344D-2A, WSX07-X, 40N2, 60N2, and CXN Series device brackets.
C
M-MAB 6A Mini Adapter 6A Opening – Must be purchased separately for
mounting modules into Walker Systems where it is indicated they are not
included. Available in ivory.
CM-ARA* Angled Raceway Adapter – With two outlet identification labels with clear
covers and two matching screw covers. Provides angled exit in multichannel
raceway systems and WallSource
™
Boxes. Accepts two 2A size modules.
Snaps into standard device mounting brackets.
* Standard color is Ivory, for other colors add suffix: “-WH” for White, or “-G” for Gray (matches Gray steel raceways).
CM Series Communication Module Mounting Adapters Ordering Information
Flush
3 1/16"
[78mm]
2 5/16"
[59mm]
NOTE: Add suffix “-WH” to indicate White finish.
Catalog No./Item Description/Specifications
CM-SFP Single Gang Faceplate –
For mounting three (3) CM2
Series modules or Pass &
Seymour
®
Activate
™
Series
device modules.
CM-DFP Double Gang Faceplate –
For mounting six (6) CM2
Series modules or Pass &
Seymour
®
Activate
™
Series
device modules.
Catalog No./Item Description/Specification
CM-SAP Single Gang Angled
Faceplate – For mounting
three (3) CM2 Series modules
or Pass & Seymour
®
Activate
™
Series device modules.
CM-DAP Double Gang Angled
Faceplate – For mounting
four (4) CM2 Series modules
or Pass & Seymour
®
Activate
™
Series device modules.
CM Series Faceplates Ordering Information
Shown: Dual and Single
Unloaded Keystone
Jack Modules.