Installation Manual

ManualsBrandsWiremold ManualsBoxes & Enclosures2a Single Unloaded Keystone Mod Bk

Open System Communication Connectivity Solutions

CM Series Open System Communication Modules

support open system architecture by providing a

variety of unloaded modules to accept devices

from Ortronics

and other industry leading

manufacturers. Mounting industry standard

communication devices in Wiremold wire and cable

management systems has never been easier.

These open system modules provide a ﬂexible and

aesthetically pleasing way to easily connect

communication cabling at the point-of-use.

Open system capabilities. Unloaded modules are available

to accept a wide range of industry standard keystone jacks,

SC & ST ﬁber optic adapters, as well as, select proprietary

solutions from AMP NET CONNECT, Avaya/Lucent

and NORDX.

Wire management compatible. Modules snap securely into

Wiremold communication ready device brackets featuring

2A & 6A openings for an aesthetically pleasing look.

Installation and conﬁguration ease. Modules feature

a front load snap-in design for ease of installation and

allowing outlet conﬁguration changes to be made quickly.

Listed.

F E A T U R E S & B E N E F I T S

ED1119R8 – Updated July 2013 – For latest specs visit www.legrand.us/wiremold

WIREMOLD

Communication Modules

Shown: Dual and Single Unloaded Keystone Jack Modules.

Communication modules provide a seamless point-of-use interface in Wiremold wire and cable management systems.

Shown: Vista Architectural Column, OFR Series Overﬂoor Raceway and Prewired Aluminum Raceway.

Summary of content (4 pages)

PAGE 1
® WIREMOLD Communication Modules Open System Communication Connectivity Solutions CM Series Open System Communication Modules support open system architecture by providing a variety of unloaded modules to accept devices from Ortronics ® and other industry leading manufacturers. Mounting industry standard communication devices in Wiremold wire and cable management systems has never been easier.
PAGE 2
CM Series Open System Modules Ordering Information Catalog No./Item Description/Specifications Catalog No./Item Description/Specifications CM2-U2TJ 2A, Dual Flushmount Unloaded Ortronics® TracJack® Module – For mounting two Ortronics® TracJack devices. CM2-U1NOR 2A, Single Flushmount NORDX/ CDT Unloaded Module – For use with MDVOFlex Jacks and Fiber Modules. CM2-U2AMP 2A, Single Unloaded AMP NETCONNECT Module – For mounting two AMP NETCONNECT SL Series devices.
PAGE 3
CM Series Communication Module Mounting Adapters Ordering Information Catalog No./Item Description/Specifications End Plates – Includes two outlet identification labels with clear covers and two matching screw covers. Required for mounting Pass & Seymour® Activate™ and Wiremold Open System communication modules into 4050, 5450, 5550, 2344SD-2A, 2344D-2A, WSX07-X, 40N2, 60N2, and CXN Series device brackets.
PAGE 4
NOTES Electrical Wiring Systems 60 Woodlawn Street West Hartford, CT 06110 Phone: 1.877.BY.LEGRAND (295-3472) www.legrand.us ED1119R8 – Updated July 2013 – For latest specs visit www.legrand.us/wiremold © Copyright 2013 Legrand All Rights Reserved 570 Applewood Crescent Vaughan, Ontario L4K 4B4 Phone:905.738.9195 www.legrand.