Cut Sheet

Catalog No./Item Description/Specifications
AL3300WC Wire Clip (Spring Steel) – Holds wires
and cables in raceway base. Use
with undivided raceway, snaps into
grooves in base.
AL3301 Base Coupling (Galvanized Steel) –
Set screw coupling used for
attaching in-line raceway sections.
AL3301D Divider Clip (Galvanized Steel) –
Required for holding AL3300D5 Divider
in place. Use one every 30" (76.2m).
AL3309 Ground Clamp (Galvanized Steel) –
Connects equipment grounding
conductor to raceway.
AL3310B Blank End Fitting – Closes off open
end of AL3300 Series Raceway.
AL3310B1 End Fitting – End feeds raceway
with 1/2" or 3/4" trade size conduit
or armored cable.
AL3311 90° Flat Elbow Fitting – Right angle
turns on same surface. Two
AL3301 Couplings included.
Catalog No./Item Description/Specifications
AL3315 Tee Fitting – 90° tee connection of
two runs of AL3300 Series Raceway.
Three AL3301 Couplings included
AL3316 Cross Fitting – 90° cross-through
connection of two runs of raceway.
Four AL3301 Couplings included.
AL3317 Internal Elbow Fitting – For making
90° internal corners. Two AL3301
Couplings included.
AL3318 External Elbow Fitting – For making
external corners. Two AL3301
Couplings included.
2 7/8"
(73mm)
1 7/8"
(48mm)
2 3/4""
(70mm)
AL3300 Series Raceway Ordering Information (continued)
1 1/2"
(38mm)
3"
(76mm)
2 3/4"
(70mm)
3"
(76mm)
3"
(76mm)
1 7/8"
(48mm)
6"
(152mm)
6"
(152mm)
3 1/8"
(79mm)
9"
(229mm)
3 1/8"
(79mm)
6"
(152mm)
3"
(76mm)
9"
(229mm)
9"
(229mm)
4 7/8"
(124mm)
3"
(76mm)
4 7/8"
(124mm)
6"
(152mm)
6"
(152mm)