Cut Sheet

8
F
Catalog No./Item Description/Specifications
AV3SHTCBKCR
Poke-Thru Controlled Receptacle –
AV3SHTCBSCR Nonmetallic Slide Holder Assembly
AV3SHTCGYCR with Controlled Receptacle
AV3SHTCAACR Markings. Markings are located in
AV3SHTCVYCR a recess pad and are permanent
indicating the duplex receptacle
below has been wired up to comply
with 2014 NEC
®
, CA Title 24 and
ASHRAE Energy Efficiency
Standard 90.1. Available in black
(BK), brass (BS), gray (GY),
aluminum (AA) and. ivory (VY).
Slide holder to be used with the
AV3ATC and AV3CTC units.
AV3SHTCGY Nonmetallic Slide Holder
AV3SHTCBK Assembly – Available in gray
AV3SHTCAL (GY), black (BK), ivory (VY),
AV3SHTCBS aluminum colored (AL),
AV3SHTCVY brass colored (BS).
AV3APTCGY Abandonment plate –
AV3APTCBK Abandonment available in
black (BK) and gray (GY).
RC37REC Replacement Receptacle –
RC37REC-25 Prewired snap-in 20A receptacle
can be wired as standard duplex
or isolated ground. Available
only in black. See installation
instructions with replacement
receptacle for complete
installation details. The
RC37REC-25 is available
with 25 foot leads and can
be wired as standard duplex
or isolated ground.
F
Catalog No./Item Description/Specifications
AV3STC Insert Assembly with Disposable
Plate – Use with AV3C Series
covers to complete installation.
AV3CTCGY* Finish Flange & Slide Holder
AV3CTCBK* Assembly – Includes one prewired
AV3CTCAL* 20A duplex receptacle which can
AV3CTCAA* be wired as a standard receptacle
AV3CTCBS* or isolated ground. Includes one
AV3CTCAB* Extron adapter to accept Extron
AV3CTCVY* MAAP mini architectural adapter
plates. (Extron devices sold
separately, only through authorized
Extron dealers). Includes Ortronics
®
TracJack and Series II mounting
adapters and.Wiremold Open
System adapters and inserts.
AV3ATCGY* Assembled Unit – A/V device
AV3ATCBK* includes one prewired 20A duplex
AV3ATCAL* receptacle which can be wired as
AV3ATCAA* a standard receptacle or
AV3ATCBS* isolated ground. Includes one
AV3ATCAB* Extron bezel to accept Extron
AV3ATCVY* MAAP mini architectural adapter
plates. (Extron devices sold
separately, only through authorized
Extron dealers). Includes Ortronics
®
TracJack and Series II mounting
adapters and Wiremold Open
System adapters and inserts.
AV3 Series Ordering Information
NOTE: Assembled with scrub
water gasket. For use on
tile or carpet floors.
NOTE: Assembled with scrub
water gasket. For use on
tile or carpet floors.
NOTE: Assembled with scrub
water gasket. For use on
tile or carpet floors.
8 1/4"
(210mm)
17"
(432mm)
8 1/4"
(210mm)
5 3/4"
(146mm)
NOTE: See page 3 for specifications.
NOTE: The 20A duplex receptacle supplied with the scrub
water version AV3 Poke-Thru Device is proprietary
and can only be replaced with the RC37REC or
RC37REC-25.
16 5/8"
(422mm)
7"
(178mm)
5 3/4"
(146mm)
NOTE: Modular Jacks sold separately.
NOTE: Modular Jacks
sold separately.
* Poke-Thru Devices on this page are available in some or all of the
following cover color options as indicated by the part numbers:
GY – Gray painted flange with gray nonmetallic cover,
BK – Black painted flange with black nonmetallic cover,
VY – Ivory painted flange with ivory nonmetallic cover,
AL – Brushed Aluminum flange with black nonmetallic cover
BS – Brushed Brass flange with black nonmetallic cover
AA –
Brushed Aluminum flange with aluminum-colored nonmetallic cover
AB – Brushed Brass flange with brass-colored nonmetallic cover
Where applicable, slide covers match the cover color.
4" HOLE SIZE POKETHRU DEVICES
CAUTION: Not intended for use on polished
concrete or terrazzo floor applications.
Catalog Number Explanation AV3ATCAL
AV3 A TC AL
Identifies Identifies Identifies that Unit Identifies Color of
Poke-Thru Series Assembled Unit (A) is approved for Tile Cover Assembly
or Cover (C) and Carpet Floors (See below )
CAUTION: Not intended for use
on polished concrete
or terrazzo floor
applications.