Cut Sheet

7
F
Catalog No./Item Description/Specifications
RC9AMDTCGY* Poke-Thru Assembly – All
RC9AMDTCBK* communication device accepts
RC9AMDTCAL* up to four UTP
connectors.
RC9AMDTCBS* Includes with bezels to accept four
RC9AMDTCAB* (4) Ortronics
®
TracJack modular
RC9AMDTCVY* jacks and two (2) Series II
RC9AMDTCAA* modular jacks (Devices sold
separately) and Wiremold Open
System Inserts.
RC9APTCBK Abandonment Plate –
Abandonment available in
black (BK).
ABPLUG3 Abandonment Plug Assembly –
Complete plug assembly for
abandoning an open 3" (76mm)
cored-hole. Assembly includes
intumescent fire-stop material to
maintain the fire-classification of
the floor, integral retainer ring to
prevent the unit from pulling up
through the floor, and a black
die-cast aluminum cover.
F
Catalog No./Item Description/Specifications
RC9AM2STC Insert Flange with Disposable
Plate – Use with RC9C and
RC9CMD,Series Covers
to complete installation.
RC9CMDTCGY* Finish Flange & Slide
RC9CMDTCBK* Holder Assembly –
RC9CMDTCAL* Includes adapters to accept four (4)
RC9CMDTCBS* Ortronics
®
TracJack modular
RC9CMDTCAB* jacks,two (2) Series II modular
RC9CMDTCVY* jacks (Devices sold separately) and
Wiremold Open System inserts.
RC9SHMDTCGY Nonmetallic Slide Holder
RC9SHMDTCBK Assembly– available in black (BK),
RC9SHMDTCBS gray (GY), ivory (VY), and
RC9SHMDTCVY nonmetallic brass (BS).
RC9AMD Series Ordering Information
NOTE: See page 3 for specifications.
10"
(254mm)
6"
(152mm)
7"
(178mm)
NOTE: Assembled with scrub water
gasket. For use on tile or
carpet floors
5"
(127mm)
5"
(127mm)
NOTE: To abandon the RC9
Series Poke-Thru Device,
the internal gasket and
quad receptacle must not be
removed in order to maintain UL
Classification. Also, the stem
must remain in the core-
drilled hole.
7"
(178mm)
3 3/16"
(97mm)
NOTE: Modular Jacks
sold separately.
* Poke-Thru Devices on this page are available in some or all of the
following cover color options as indicated by the part numbers:
GY – Gray painted flange with gray nonmetallic cover,
BK – Black painted flange with black nonmetallic cover,
VY – Ivory painted flange with ivory nonmetallic cover,
AL – Brushed Aluminum flange with black nonmetallic cover
BS – Brushed Brass flange with black nonmetallic cover
AA –
Brushed Aluminum flange with aluminum-colored nonmetallic cover
AB – Brushed Brass flange with brass-colored nonmetallic cover
Where applicable, slide covers match the cover color.
10"
(254mm)
7"
(178mm)
NOTE: Assembled with scrub water
gasket. For use on tile or
carpet floors
NOTE: Modular Jacks
sold separately.
3 1/16" HOLE SIZE POKETHRU DEVICES
CAUTION: Not intended for use
on polished concrete
or terrazzo floor
applications.
CAUTION: Not intended for use
on polished concrete
or terrazzo floor
applications.
CAUTION: Not intended for use
on polished concrete
or terrazzo floor
applications.
Catalog Number Explanation RC9AMDTCGY
RC9 A TC GY
Identifies Identifies Identifies that Unit Identifies Color of
Poke-Thru Series Assembled Unit (A) is approved for Tile Cover Assembly
or Cover (C) and Carpet Floors (See below )