Cut Sheet

6
F
Catalog No./Item Description/Specifications
RC9SHTCBKCR Poke-Thru Slide Controlled
RC9SHTCBSCR Receptacle – Nonmetallic Slide
RC9SHTCGYCR Holder Assembly with Controlled
RC9SHTCAACR Receptacle Markings. Markings
RC9SHTCVYCR are located in a recess pad and
are permanent indicating the quad
receptacle below has been wired up
to comply with 2014 NEC
®
, CA Title
24 and ASHRAE Energy Efficiency
Standard 90.1. Available in black
(BK), brass (BS), gray (GY),
aluminum (AA) and ivory (VY).
Slide holder to be used with
RC9A15TC and RC9CTC units
RC9SHTCGY Nonmetallic Slide Holder
RC9SHTCBK Assembly – Available in gray
RC9SHTCBS (GY), black (BK), ivory (VY), and
RC9SHTCVY nonmetallic brass (BS).
RC9APTCBK Abandonment Plate –
Abandonment available
in black (BK).
RC9REC Replacement Receptacle –
Prewired 15A quad receptacle
can be wired as standard
receptacle or isolated ground.
Available only in black. See
installation instructions with
replacement receptacle for
complete installation details.
ABPLUG3 Abandonment Plug Assembly –
Complete plug assembly for
abandoning an open 3" (76mm)
cored-hole. Assembly includes
intumescent fire-stop material to
maintain the fire-classification of
the floor, integral retainer ring to
prevent the unit from pulling up
through the floor, and a black
die-cast aluminum cover.
F
Catalog No./Item Description/Specifications
RC9STC Insert Assembly with Disposable
Plate – Includes prewired 15A quad
receptacle. use with RC9C Series
Covers to complete installation.
RC9CTCGY* Finish Flange & Slide Holder
RC9CTCBK* Assembly – Cover assembly
RC9CTCAL* includes two openings for
RC9CTCBS* pass-through capability for
RC9CTCAB* one 4-pair Category 5e or
RC9CTCVY* Category 6 cable per opening.
RC9A15TCGY* Poke-Thru Assembly – Prewired
RC9A15TCBK* 15A quad receptacle can be wired
RC9A15TCAL* as standard quad receptacle or
RC9A15TCBS* isolated ground. Unit also
RC9A15TCAB* includes two openings for
RC9A15TCVY* pass-through capability for one
4-pair Category 5e or Category 6
cable per opening.
RC9 Series Ordering Information
NOTE: See page 3 for specifications.
16 1/2"
(419mm)
7"
(178mm)
5"
(127mm)
16 1/2"
(419mm)
6"
(152mm)
5"
(127mm)
NOTE: Assembled with scrub
water gasket. For use on
tile or carpet floors.
NOTE: Assembled with scrub
water gasket. For use on
tile or carpet floors.
NOTE: To abandon the RC9
Series Poke-Thru Device,
the internal gasket and
quad receptacle must not
be removed in order to
maintain UL Classification.
Also, the stem must remain
in the core-drilled hole.
7"
(178mm)
3 3/16"
(97mm)
Catalog Number Explanation
RC9A15TCGY
RC9 A 15 TC GY
Identifies Identifies Identifies Identifies Identifies Color
Poke-Thru Assembled 15A Quad that Unit is of Cover
Series Unit (A) or Power Approved for Assembly
Cover (C) Receptacle Tile and (See below
Carpet Floors for details)
* Poke-Thru Devices on this page are available in some or all of the
following cover color options as indicated by the part numbers:
GY – Gray painted flange with gray nonmetallic cover,
BK – Black painted flange with black nonmetallic cover,
VY – Ivory painted flange with ivory nonmetallic cover,
AL – Brushed aluminum flange with black nonmetallic cover
BS – Brushed brass flange with black nonmetallic cover
AA – Brushed aluminum flange with aluminum-colored nonmetallic cover
AB – Brushed brass flange with brass-colored nonmetallic cover
Where applicable, slide covers match the cover color.
7"
(178mm)
NOTE: Assembled with scrub
water gasket. For use on
tile or carpet floors.
3 1/16" HOLE SIZE POKETHRU DEVICES
CAUTION: Not intended for use
on polished concrete
or terrazzo floor
applications.
CAUTION: Not intended for use
on polished concrete
or terrazzo floor
applications.