Cut Sheet

Catalog No./Item Description/Specifications
RC37REC Replacement Receptacle –
RC37REC-25 Prewired snap-in 20A receptacle
can be wired as standard duplex
or isolated ground. Available
only in black. See installation
instructions with replacement
receptacle for complete
installation details. The
RC37REC-25 is available
with 25 foot leads and can
be wired as standard duplex
or isolated ground.
Catalog No./Item Description/Specifications
ABPLUG3 Abandonment Plug Assembly –
Complete plug assembly for
abandoning an open 3" (76mm)
cored-hole. Assembly includes
intumescent fire-stop material to
maintain the fire-classification of
the floor, integral retainer ring to
prevent the unit from pulling up
through the floor, and a black
die-cast aluminum cover.
RC7APTCBK Abandonment Plate –
RC7APTCGY Abandonment available
in black (BK), gray (GY).
COM50 Communication Adapter –
COM75 For two 1/2" trade size conduit
connections (COM50). For two
3/4" trade size conduit
connections (COM75).
5
NOTE: No additional capacity with COM75.
RC7 Series Ordering Information (Continued)
NOTE: See page 3 for specifications.
5"
(127mm)
NOTE: To abandon the RC7 Series Poke-Thru Device, the
internal gasket,duplex receptacle, and communication
modules must not be removed in order to maintain UL
Classification. Also the stem must remain in the core-
drilled hole.
NOTE: The 20A duplex receptacle supplied with the
new scrub water version RC7 Poke-Thru Device
is proprietary and can only be replaced with the
RC37REC or RC37REC-25.
7"
(178mm)
3 3/16"
(97mm)
3 1/16" HOLE SIZE POKETHRU DEVICES