Cut Sheet

13
Catalog No./Item Description/Specifications
ABPLUG4 Abandonment Plug Assembly –
Complete plug assembly for
abandoning an open 4" (102mm)
cored-hole. Assembly includes
intumescent fire-stop material to
maintain the fire-classification of
the floor, integral retainer ring to
prevent the unit from pulling up
through the floor, and a black
die-cast aluminum cover.
COM50 Communication Adapter –
COM75 For two 1/2" trade size conduit
connections (COM50). For two
3/4" trade size conduit
connections (COM75).
Catalog No./Item Description/Specifications
RC3SHTCBKCR
Poke-Thru Controlled Receptacle –
RC3SHTCBSCR Nonmetallic Slide Holder Assembly
RC3SHTCGYCR with Controlled Receptacle
RC3SHTCAACR Markings. Markings are located
RC3SHTCVYCR in a recess pad and are permanent
indicating the duplex receptacle
below has been wired up to comply
with 2014 NEC
®
, CA Title 24 and
ASHRAE Energy Efficiency
Standard 90.1. Available in black
(BK), brass (BS), gray (GY),
aluminum (AA) and. ivory (VY).
Slide holder to be used with the
RC3ATC and RC3CTC units.
RC3APTCBK Abandonment Plate –
RC3APTCGY Abandonment available in
black (BK), gray (GY).
RC37REC Replacement Receptacle –
RC37REC-25 Prewired snap-in 20A receptacle
can be wired as standard duplex
or isolated ground. Available
only in black. See installation
instructions with replacement
receptacle for complete
installation details. The
RC37REC-25 is available
with 25 foot leads and can
be wired as standard duplex
or isolated ground.
RC3 Series Ordering Information (Continued)
NOTE: See page 3 for specifications.
5"
(127mm)
NOTE: To abandon the RC3 Series Poke-Thru Device,
the internal gasket,duplex receptacle, and
communication modules must not be removed in
order to maintain UL Classific ation. Also the stem
must remain in the core-drilled hole.
NOTE: The 20A duplex receptacle
supplied with the scrub water
version RC3 Poke-Thru Device
is proprietary and can only
be replaced with the RC37REC
or RC37REC-25.
7 1/2"
(191mm)
3 7/8"
(98mm)
4" HOLE SIZE POKETHRU DEVICES
NOTE: No additional capacity
with COM75.
CAUTION: Not intended for use
on polished concrete
or terrazzo floor
applications.