Cut Sheet

12
Catalog No./Item Description/Specifications
RC3ATCGY Assembled Unit – Prewired 20A
RC3ATCBK duplex receptacle can be wired as
RC3ATCAL standard duplex or isolated ground.
RC3ATCBS Wiremold
Open System unloaded
RC3ATCVY inserts to accept four discrete
RC3ATCAB keystone
connectors from most
RC3ATCAA
manufacturers are provided.
Includes two (2) Ortronics
®
TracJack mounting adapters and
two (2) Ortronics Series II adapters.
(Devices sold separately.)
RC3KTCGY Retrofit Kit – Used to upgrade
RC3KTCBK existing installations of RC3
RC3KTCAL Poke-Thru Devices on carpet
RC3KTCBS floors to meet scrub water
RC3KTCVY requirements. Includes 20A duplex
receptacle that can be wired as a
standard duplex or isolated ground.
Also includes scrub water finish
flange and slide holder assembly.
Flange available in painted black
(BK), gray (GY), ivory (VY), and
brushed metal finishes in aluminum
(AL), and brass (BS). Kit also
includes duplex receptacle barrier.
Old barrier must be replaced with
new. See installation instructions
with retrofit kit for complete
installation details.
Catalog No./Item Description/Specifications
RC3STC Insert Assembly with Disposable
Plate – Use with RC3C Series
Covers to complete installation.
RC3CTCGY* Finish Flange and Slide
RC3CTCBK*
Holder Assembly – Prewired 20A
RC3CTCAL* duplex receptacle can be wired
RC3CTCBS*
as standard duplex or isolated
RC3CTCAB* ground. Wiremold Open System
RC3CTCVY* unloaded inserts to accept four
RC3CTCAA* discrete keystone connectors from
most manufacturers are provided.
Includes two (2) Ortronics
®
TracJack mounting adapters and
two (2) Series II adapters. (Devices
sold separately.)
RC3SHTCBK Nonmetallic Slide Holder
RC3SHTCGY Assembly – Available in black
RC3SHTCBS (BK), gray (GY), ivory (VY), and
RC3SHTCVY nonmetallic brass (BS).
RC3 Series Ordering Information
16 11/16"
(424mm)
5"
(127mm)
NOTE: See page 3 for specifications.
7 1/2"
(191mm)
NOTE: Assembled with scrub
water gasket. For use on
tile or carpet floors.
NOTE: Assembled with scrub
water gasket. For use on
tile or carpet floors.
NOTE: Modular Jacks
sold separately.
* Poke-Thru Devices on this page are available in some or all of the
following cover color options as indicated by the part numbers:
GY – Gray painted flange with gray nonmetallic cover,
BK – Black painted flange with black nonmetallic cover,
VY – Ivory painted flange with ivory nonmetallic cover,
AL – Brushed Aluminum flange with black nonmetallic cover
BS – Brushed Brass flange with black nonmetallic cover
AA –
Brushed Aluminum flange with aluminum-colored nonmetallic cover
AB – Brushed Brass flange with brass-colored nonmetallic cover
Where applicable, slide covers match the cover color.
7 1/2"
(191mm)
4" HOLE SIZE POKETHRU DEVICES
7 1/2"
(191mm)
16"
(406mm)
NOTE: Assembled with scrub
water gasket. For use on
tile or carpet floors.
NOTE: Modular Jacks
sold separately.
CAUTION: Not intended for use
on polished concrete
or terrazzo floor
applications.
CAUTION: Not intended for use
on polished concrete
or terrazzo floor
applications.
Catalog Number Explanation RC3ATCAL
RC3 A TC AL
Identifies Identifies Identifies that Unit Identifies Color of
Poke-Thru Series Assembled Unit (A) is approved for Tile Cover Assembly
or Cover (C) and Carpet Floors (See below )