Cut Sheet

10
Catalog No./Item Description/Specifications
RC4ATCGY* Assembled Unit – Unit includes
RC4ATCBK* four prewired 20A receptacles.
RC4ATCAL* Each duplex receptacle is wired
RC4ATCBS* as a separate circuit. The duplex
RC4ATCVY* can be wired as a standard
RC4ATCAB* receptacle or isolated ground.
RC4ATCAA* Wiremold Open System unloaded
inserts to accept four discrete
keystone connectors from most
manufacturers are included.
Includes Ortronics
®
TracJack
mounting adapter and Series II
communication housing.
(Devices sold separately.)
RC4KTCBK Retrofit Kit – Used to upgrade
RC4KTCGY existing installations of RC4
RC4KTCAL Poke-Thru Devices on carpet
RC4KTCBS floors to meet scrub water
RC4KTCAB requirements. Includes two 20A
RC4KTCVY duplex receptacles that can be
wired as a standard duplex or
isolated ground. Also includes
scrub water finish flange and
slide holder assembly. Flange
available in painted black (BK),
gray (GY), ivory (VY), and brushed
metal finishes in aluminum (AL),
and brass (BS). See installation
instructions with retrofit kit for
complete installation details.
Catalog No./Item Description/Specifications
RC4STC Insert Assembly with Disposable
Plate – Comes complete with
four prewired 20A receptacles.
Use RC4STC with RC4C Series
Covers.
RC4CTCGY* Finish Flange and
RC4CTCBK* Slide Holder Assembly –
RC4CTCAL* Wiremold open system unloaded
RC4CTCBS* inserts to accept four discrete
RC4CTCAB* keystone connectors from most
RC4CTCVY* manufacturers are provided.
RC4CTCAA* Includes Ortronics
®
TracJack
mounting adapter and Series II
communication housing. (Devices
sold separately.)
RC4SHTCBK Nonmetallic Slide Holder
RC4SHTCGY Assembly – Available in black
RC4SHTCBS (BK), gray (GY), ivory (VY), and
RC4SHTCVY nonmetallic brass (BS).
RC4 Series Ordering Information
6"
(152mm)
16 3/8"
(416mm)
6 1/4"
(159mm)
NOTE: See page 3 for specifications.
8 1/4"
(210mm)
NOTE: Assembled with scrub
water gasket. For use on
tile or carpet floors.
NOTE: Assembled with scrub
water gasket. For use on
tile or carpet floors.
NOTE: Modular Jacks
sold separately.
* Poke-Thru Devices on this page are available in some or all of the
following cover color options as indicated by the part numbers:
GY – Gray painted flange with gray nonmetallic cover,
BK – Black painted flange with black nonmetallic cover,
VY – Ivory painted flange with ivory nonmetallic cover,
AL – Brushed Aluminum flange with black nonmetallic cover
BS – Brushed Brass flange with black nonmetallic cover
AA –
Brushed Aluminum flange with aluminum-colored nonmetallic cover
AB – Brushed Brass flange with brass-colored nonmetallic cover
Where applicable, slide covers match the cover color.
8 1/4"
(210mm)
16 3/8"
(416mm)
NOTE: Assembled with scrub
water gasket. For use on
tile or carpet floors.
NOTE: Modular Jacks
sold separately.
8 1/4"
(210mm)
4" HOLE SIZE POKETHRU DEVICES
CAUTION: Not intended for use
on polished concrete
or terrazzo floor
applications.
CAUTION: Not intended for use
on polished concrete
or terrazzo floor
applications.
Catalog Number Explanation RC4ATCAL
RC4 A TC AL
Identifies Identifies Identifies that Unit Identifies Color of
Poke-Thru Series Assembled Unit (A) is approved for Tile Cover Assembly
or Cover (C) and Carpet Floors (See below )