Cut Sheet

ManualsBrandsWiremold ManualsAssembled UnitsPoke-Thru Abandonment Plug, 3" Core Hole, Aluminum

WIREMOLD

Surface Style Poke-Thru Devices

Bring Power & Communication Services

Directly to the Workstation

Flush Style Poke-Thru Devices are an excellent solution for

bringing power, communication, and audio/video services

to the workstation in an open space, above-grade floor

environment. All Wiremold Flush Style Poke-Thru Devices come

with built-in TopGuard

™

protection, an industry-leading design

that meets and exceeds UL scrub water exclusion requirements

for tile and carpet floors. Topguard protection prevents water, dirt,

or debris from entering not just the power devices, but also the

communication devices.

All Wiremold Flush Style Poke-Thru Devices can be installed

on tile, carpet, or wood covered floors. Each of these devices

provides an excellent solution for both new or retrofit construction,

with typical applications that include office buildings, airports,

malls, shopping centers, libraries, and schools.

FEATURES & BENEFITS

AV3 Series is specifically designed to meet the

grow

ing

needs of the audio and video market. AV3

Series accepts

Extron

MAAP Series mini architectural

adapter plates.

The MAAP line includes passive A/V connector

plates that

support a wide variety of video, audio, control, voice

and data

connectors, as well as active modules such as VGA

line

drivers, audio buffers and twisted pair transmitters. (Extron

devices sold separately only through authorized Extron dealers.)

AMD8 Series is designed to meet the growing need for

more communication capacity at the workstation.

AMD8

Series is a large capacity all communication poke-thru

device, providing up to 8-ports for communication

devices.

AMD8 is a flush style device with individual slide

covers

to prevent water, dirt and debris from entering the

communication devices.

TopGuard Protection. Integral design component that prevents

water, dirt and debris from entering power and communication

compartments. Whenever you see the TopGuard protection

icon on any Wiremold product, you’ll know it meets and

exceeds UL scrub water exclusion requirements for tile and

carpet floors.

UL Listed and UL Fire Classified to U.S. and Canadian

safety standards for tile and terrazzo. Includes the new

UL requirements under UL514A and UL 514C for the scrub

water exclusion test for carpet and wood covered floors.

Multiple

service capability. RC7, AV3, and RC4 Series

provide

power and communication services. The AV3 and RC4

Series

provide for use of flush or recessed fiber optic devices.

Eliminates

the cost of a second poke-thru to accommodate

additional services.

Provides flexibility with a single poke-thru unit. 20A duplex

receptacle in the AV3, and the RC7 Series can be wired as

standard or isolated ground receptacle. Two 20A duplex power

receptacles in the RC4 Series are wired with a 6-wire system

with individual neutral and ground wires, and can be wired for

standard or isolated ground. RC9 quad 15A receptacle can

also be wired as standard or isolated ground receptacle.

Individual slide covers. Protects power and communication

devices. Power slide covers snap back into place when

receptacle is not in use. Activate either power or communication

services, simultaneously or individually. RC9AMD and AMD8

Series Poke-Thru Devices are the only all communication poke-

thru devices available with slide cover protection.

Datacom connectivity options. Accepts industry standard

and proprietary devices from a wide range of manufacturers

to provide a seamless and aesthetically pleasing interface for

voice, data, audio, and video applications at the point-of-use.

“Step-on-it” installation. Quick and easy installation without

the need for additional fasteners or a second installer.

Suitable for use in air handling plenums. In accordance with

Sec 300-22(C) of the National Electrical Code.

Meets ADA Accessibility Guidelines. Wide trim flange on the

product is designed to meet the ADA Accessibility Guidelines

as it pertains to ADA Standard 4.5 which addresses changes

in floor and ground surface levels. The poke-thru trim flanges

are beveled so the slope is no greater than 1:2 ratio.

Fire rated for up to 2-hour rated floors. Maintains the fire

classification of the floor.

ED1215R13 – Updated April 2016 – For latest specs visit www.legrand.us/wiremold

RC7 Series

AV3 Series

RC4 Series

AMD8 Series

Protection from

water, dirt,

and debris.

Summary of content (16 pages)

PAGE 1
WIREMOLD® Surface Style Poke-Thru Devices Bring Power & Communication Services Directly to the Workstation Flush Style Poke-Thru Devices are an excellent solution for bringing power, communication, and audio/video services to the workstation in an open space, above-grade floor environment. All Wiremold Flush Style Poke-Thru Devices come with built-in TopGuard™ protection, an industry-leading design that meets and exceeds UL scrub water exclusion requirements for tile and carpet floors.
PAGE 2
Flush Poke-Thru Device Specifications 3" Diameter Hole POKE-THRU SERIES HOLE SIZE UL FIRE CLASSIFICATION UL SCRUBWATER PROTECTION FEED CHANNELS MAXIMUM COPPER FILL CAPACITY POWER* COMMUNICATIONS* POWER COMMUNICATIONS COVER SIZE COVER COLORS APPROVED CONCRETE FLOOR COVERINGS FLOOR COVERING THICKNESS RC7 Series Minimum: 3 1/16" Maximum: 3 1/8" RC9 Series (78mm) Minimum: 3 1/16" (79mm) Maximum: 3 1/8" RC9AMD Series (78mm) Minimum: 3 1/16" (79mm) Maximum: 3 1/8" (78mm) (79mm) 1-, 1 1/2- & 2-h
PAGE 3
Flush Poke-Thru Device Specifications Trim Flange for Carpet or Tile Copper Cross Section: The copper cross-sectional area determines the amount of wire fill capacity in a poke-thru device. Unlike other wire and cable management systems that utilize wire fill capacity, a poke-thru device is UL tested under fire conditions to determine the maximum amount of copper conductors that will pass through a poke-thru device, while maintaining the fire-rating of the floor assembly.
PAGE 4
3 1/16" HOLE SIZE POKE-THRU DEVICES RC7 Series Ordering Information Catalog No./Item Description/Specifications Catalog No./Item RC7STC Insert Assembly with Disposable Plate – Use with RC7C Series Covers to complete installation.
PAGE 5
3 1/16" HOLE SIZE POKE-THRU DEVICES RC7 Series Ordering Information (Continued) Catalog No./Item Description/Specifications Catalog No./Item ABPLUG3 Abandonment Plug Assembly – Complete plug assembly for 7" (178mm) abandoning an open 3" (76mm) cored-hole. Assembly includes intumescent fire-stop material to maintain the fire-classification of the floor, integral retainer ring to prevent the unit from pulling up through the floor, and a black 3 3/16" die-cast aluminum cover.
PAGE 6
3 1/16" HOLE SIZE POKE-THRU DEVICES F Information RC9 Series Ordering F Catalog No./Item RC9STC 6" (152mm) Catalog No./Item Description/Specifications Insert Assembly with Disposable Plate – Includes prewired 15A quad receptacle. use with RC9C Series Covers to complete installation.
PAGE 7
3 1/16" HOLE SIZE POKE-THRU DEVICES F RC9AMD Series Ordering Information F Catalog No./Item RC9AM2STC 6" (152mm) Catalog No./Item Description/Specifications Catalog Number Explanation RC9AMDTCGY RC9 A TC GY Insert Flange with Disposable Plate – Use with RC9C and RC9CMD,Series Covers to complete installation.
PAGE 8
4" HOLE SIZE POKE-THRU DEVICES F Information AV3 Series Ordering F Catalog No./Item AV3STC Catalog No./Item Description/Specifications AV3SHTCBKCR AV3SHTCBSCR AV3SHTCGYCR AV3SHTCAACR AV3SHTCVYCR Insert Assembly with Disposable Plate – Use with AV3C Series covers to complete installation.
PAGE 9
4" HOLE SIZE POKE-THRU DEVICES F AMD8 Series Ordering Information F Catalog No./Item Catalog No./Item Description/Specifications ABPLUG4 Abandonment Plug Assembly – Complete plug assembly for 7 1/2" abandoning an open 4" (102mm) (191mm) cored-hole. Assembly includes intumescent fire-stop material to maintain the fire-classification of the floor, integral retainer ring to prevent the unit from pulling up through the floor, and a black die-cast aluminum cover.
PAGE 10
4" HOLE SIZE POKE-THRU DEVICES RC4 Series Ordering Information Catalog No./Item Description/Specifications Catalog No./Item RC4STC Insert Assembly with Disposable Plate – Comes complete with 6" (152mm) four prewired 20A receptacles. Use RC4STC with RC4C Series Covers.
PAGE 11
4" HOLE SIZE POKE-THRU DEVICES RC4 Series Ordering Information (Continued) Catalog No./Item Description/Specifications Catalog No./Item RC4SHTCBK2CR RC4SHTCBS2CR RC4SHTCGY2CR RC4SHTCAA2CR RC4SHTCVY2CR Poke-Thru Controlled Receptacle – Nonmetallic Slide Holder Assembly with Controlled Receptacle Markings.
PAGE 12
4" HOLE SIZE POKE-THRU DEVICES RC3 Series Ordering Information Catalog No./Item Description/Specifications Catalog No./Item RC3STC Insert Assembly with Disposable Plate – Use with RC3C Series Covers to complete installation.
PAGE 13
4" HOLE SIZE POKE-THRU DEVICES RC3 Series Ordering Information (Continued) Catalog No./Item Description/Specifications RC3SHTCBKCR RC3SHTCBSCR RC3SHTCGYCR RC3SHTCAACR RC3SHTCVYCR Catalog No./Item Poke-Thru Controlled Receptacle – Nonmetallic Slide Holder Assembly with Controlled Receptacle Markings.
PAGE 14
NOTES 14
PAGE 15
NOTES 15
PAGE 16
NOTES NOTE: All brand and product names referenced in this document are registered trademarks or trademarks of their respective holders. Electrical Wiring Systems 60 Woodlawn Street West Hartford, CT 06110 Phone: 1.877.BY.LEGRAND (295-3472) www.legrand.us ED1215R13 – Updated April 2016 – For latest specs visit www.legrand.us/wiremold © Copyright 2016 Legrand All Rights Reserved 570 Applewood Crescent Vaughan, Ontario L4K 4B4 Phone:905.738.9195 www.legrand.