Installation Manual

8
Step 1 Remove (2) 8-32 screws and pull off Feed
Plate or housing.
Step 2 Use (2) 8-32 screws to install new Feed Plate
or housing
CAUTION: To maintain fire classification, Feed Plates must
be installed.
CAUTION: To maintain fire classification, Feed Plates must
be installed.
Step 1 Remove cover assembly from Poke Thru
b
y removing (2) 8-32 screws and lifting
cover off.
CONFIGURING FEED PLATES
Step 2 Remove Poke Thru from floor by bending tabs
i
nward and pulling unit up.