Cut Sheet

Catalog No./Item Description /Specifications
881ADP PVC Floor Box Ratchet
Adjusting Ring – Used to attach
wiring devices and cover plates
to PVC Box. Locks into place
without using glue or mechanical
fasteners. Compensates for up
to 10˚ of tilt if box is not level.
Ground wire is factory attached
to the adjusting ring.
881DIV PVC Floor Box Divider Plate –
Used to isolate power and
communication compartments.
Graduated cubic inch markings
are marked clearly on the divider
and correspond directly to the
cubic inch markings on the interior
of the box. Cuts easily with a utility
knife. Supplied with a receptacle
plate that completes separation of
power and communication services.
One divider required for dual-
service activation.
895DCC Dual-Service Brass Duplex
Cover Plate – With flip lids.
Supplied with 1/2" [12.7mm] screw
plug for accessing communication
cables. 5 1/2" [140mm] diameter
for carpet applications only. Used
in conjunction with the 881DIV to
complete dual-service activation.
Catalog No./Item Description /Specifications
881 Round Nonmetallic Concrete
Floor Box – Round single service
nonmetallic concrete floor box.
Floor box has four (4) parallel
conduit hubs, internal and external
graduated markings indicating wiring
volume and concrete pour depth
respectively.
Box Includes:
• (1) Durable/reusable protective cap.
• (1) Adapter ring (881ADP).
• (1) Reducing ring to allow hub to
be reduced down to 3/4" and 1/2"
trade size openings or blanks to
close off any unused openings.
Ratchet-Pro Series Floor Box Ordering Information
6"
[152mm]
5 1/2"
[140mm]
4 1/4"
[108mm]
4"
[102mm]
1 1/8"
[29mm]
3
5 1/4"
[133mm]
NOTE: One ring required
per box, single-or
dual-service.
Ratchet-Pro Series Floor Box can be used in both on grade and
above grade concrete construction.
Country of Origin: USA
Country of Origin: USA
Country of Origin: USA
Country of Origin: China
881