Cut Sheet

ManualsBrandsWiremold ManualsBoxesFloor Box, 2-Gang, Depth: 3-7/16", (6) 1" Conduit Openings, Cast Iron

WIREMOLD

OmniBox

Series Floor Boxes

Fully Adjustable, Multiple Service, Floor Boxes

ED772R15 – Updated August 2016 – For latest specs visit www.wiremold.com

OmniBox

™

Series Floor Boxes provides an

excellent activation solution when multiple

services are required in open space areas.

OmniBox

™

Series Floor Boxes offer one-,

two-, and three-gang multi-service boxes

that are fully adjustable before and after the

concrete pour.

Available in both stamped steel and cast

iron fabrications, they meet a wide range

of workstation requirements for today’s

and tomorrow’s service needs. These floor

boxes have many applications, some of

which include schools, financial institutions,

and commercial office buildings.

n Fully adjustable box. Fully adjustable both before and after

concrete pour. Reduces installation costs.

n Two Fabrications: Stamped Steel – Lower cost concrete-tight

construction option for above grade applications. Cast-Iron –

Watertight construction for on or below grade applications.

n Available in two depths. Economical alternatives when pour

depths are limited.

n Flush activation assemblies for carpet and tile. Aesthetically

pleasing assemblies are interchangeable in both cast-iron and

stamped steel box models.

n Available in one-, two-, and three-gang configurations.

Removable dividers increase capacity. More configurations to

support multi-service applications.

n Triple service boxes. Accommodates power, communication

and/or audio/video devices which reduces the need for

multiple boxes.

n Brushed aluminum covers for power applications. 830CK

Series Aluminum Covers redesigned to accept threaded

conduit when passing through power cables.

n Brass and brushed aluminum covers accept single locking

power receptacles. New 828DLR Series provides single flip

lid cover.

n BAA Aluminum Covers. Rectangular aluminum covers are

now available in a version that complies with the Buy America

Act and ARRA requirements. Covers are available in five

powder coat finishes (black, gray, bronze, brass and nickel.

n 828COMTC Series Cover Kit in brass and brushed

aluminum. Allows communication devices to be recessed

into 880S and 880CS Series Floor Boxes.

n Partition support kit for 3-gang tile flanges. The

838TAL-880 Series Flanges provide partition supports in

tile applications for added strength and durability.

n TopGuard protection. All cover assemblies for the OmniBox

Floor Box Series have TopGuard protection. An integral design

which keeps out water, dirt, and debris from the power and

communication compartments.

n Boxes and covers have been listed by Underwriters

Laboratories Inc. to their standard UL514A, 514C,

514D, and Canadian standard C22.2

n Datacom connectivity options. Accepts industry standard

and proprietary devices from a wide range of manufacturers

to provide a seamless and aesthetically pleasing interface for

voice, data, audio, and video applications at the point-of-use.

A wide selection of data and adapter options available for use

with Ortronics

TracJack

and Series II devices.

FEATURES & BENEFITS

Protection from

water, dirt, and

debris.

Two-gang OmniBox Series Floor Box Installation with

an aesthetically pleasing flush activation cover.

Download this product’s PEP ecopasport

environmental product declaration at

www.legrand.us/resources-and-downloads.

This declaration conforms with ISO 14025 and

14040 and is in alignment with EN 15804.

Summary of content (12 pages)

PAGE 1
WIREMOLD® OmniBox Series Floor Boxes Fully Adjustable, Multiple Service, Floor Boxes Protection from water, dirt, and debris. OmniBox™ Series Floor Boxes provides an excellent activation solution when multiple services are required in open space areas. OmniBox™ Series Floor Boxes offer one-, two-, and three-gang multi-service boxes that are fully adjustable before and after the concrete pour.
PAGE 2
OmniBox Series Stamped Steel Floor Boxes Ordering Information Catalog No./Item Description/Specifications 880S1 One-Gang Stamped Steel Floor Box – Fully Adjustable. 3 23/32" (94mm) TECHNICAL SPECIFICATIONS Conduit Openings 4 13/16" (122mm) 880S2 3 15/32" (88mm) (3) 1/2" (12.7mm), (5) 3/4" (19.1mm) (2) 1" (25mm) 3 15/32" (88mm) 4 13/16" (122mm) (4) 1/2" (12.7mm), (8) 3/4" (19.1mm) (4) 1" (25mm) 117 (58/59) Adjustment Before Pour 1 3/4" (44mm) Adjustment After Pour 1/2" (12.
PAGE 3
OmniBox Series Cast Iron Floor Boxes Ordering Information Catalog No./Item Description/Specifications 880CS1-1 One-Gang Cast Iron Floor Box – Fully Adjustable. 4 3/8" (111mm) 5 3/16" (132mm) 880CS2-1 TECHNICAL SPECIFICATIONS Conduit Openings 3 7/16" (87mm) 5 3/16" (132mm) (4) 1" (25mm) 880CS3-1 3 7/16" (87mm) 3 7/16" (87mm) (6) 1" (25mm) Cubic Inch Capacity 94 (45/49) Adjustment Before Pour 1 3/4" (44mm) Adjustment After Pour 1/2" (12.
PAGE 4
OmniBox Series Cast Iron Floor Boxes Ordering Information (continued) Catalog No./Item Description/Specifications 880CM1-1 One-Gang Shallow Cast Iron Floor Box – Fully Adjustable. 4 3/8" (111mm) 5 3/16" (132mm) 880CM2-1 TECHNICAL SPECIFICATIONS Conduit Openings 2 7/16" (62mm) (4) 1" (25mm), 1 3/4" (44mm) Adjustment After Pour 1/2" (12.7mm) Two-Gang Shallow Cast Iron Floor Box – Fully Adjustable.
PAGE 5
OmniBox Series Floor Boxes Solid Brass Cover Plate Flanges Ordering Information Catalog No./Item 817B 6 1/16" (154mm) 5 1/16" (129mm) Description/Specifications Catalog No./Item One-Gang Brass Combination Carpet & Tile Flange – Accepts Ortronics® MAB6TJ TracJack and MAB3S2 Series II adapters and Wiremold CM Series inserts, sold separately. 837C Three-Gang Brass Carpet Flange – For use on 880S3, 880M3, 880CS32-1, and 880CM3-1 Floor Boxes.
PAGE 6
OmniBox Series Floor Boxes Metal Cover Plates Ordering Information Catalog No./Item 828R 3 1/8" (79mm) 4 3/16" (106mm) 828GFITC Description/Specifications Catalog No./Item Brass Duplex Cover Plate – Flip lids. Can also be used with a 106 type communication adapter. 829STC Brass Communication Cover Plate – Data slides. Feed through only, not for use with a mounting plate for communication jacks.
PAGE 7
OmniBox Series Floor Boxes Brushed Aluminum Cover Plate Flanges Ordering Information Catalog No./Item 818TCAL 6" (152mm) 5" (127mm) Description/Specifications Catalog No./Item One-Gang Brushed Aluminum Combination Carpet and Tile Flange – Accepts Ortronics® MAB6TJ TracJack and MAB3S2 Series II adapters and Wiremold CM Series inserts, sold separately.
PAGE 8
OmniBox Series Floor Boxes Metal Cover Plates Ordering Information Catalog No./Item Description/Specifications 828R-TCAL Catalog No./Item Brushed Aluminum Duplex Cover Plate – Flip lids. Can also be used with a 106 type communication adapter.
PAGE 9
OmniBox Series Floor Boxes Powder-Coated Aluminum Cover Plate Flanges Ordering Information Catalog No./Item Description/Specifications 817TCAL-BK 817TCAL-GY 817TCAL-BS 817TCAL-NK 817TCAL-BZ 6 1/16" (154mm) 827TCAL-BK 827TCAL-GY 827TCAL-BS 827TCAL-NK 827TCAL-BZ 6 1/16" (154mm) Catalog No.
PAGE 10
OmniBox Series Floor Boxes Powder-Coated Aluminum Cover Plate Flanges Ordering Information (Continued) Catalog No./Item 829CKAL-3/4BK 829CKAL-3/4GY 829CKAL-3/4BS 829CKAL-3/4NK 829CKAL-3/4BZ Description/Specifications Catalog No./Item Powder-Coated Aluminum Cover Plate – Power or communication plate with 2" (51mm) and 3/4" (19.1mm) plugs. Covers are available in five decorative colors: black, gray brass,nickel and bronze.
PAGE 11
OmniBox Series Floor Boxes Nonmetallic Cover Plate Flanges Ordering Information Catalog No./Item Catalog No./Item Description/Specifications Description/Specifications 837PCC-BLK Three-Gang Nonmetallic 837PCC-BRN Flange – Available in black or brown. For Ortronics® connectivity use with 829PFLRT Cover. For Activate connectivity use with 13" 829PFL Cover. Accepts Ortronics® (330mm) 5 3/4" MAB6TJ TracJack and MAB3S2 (146mm) Series II adapters and Wiremold CM Series inserts, sold separately.
PAGE 12
NOTES NOTE: All brand and product names referenced in this document are registered trademarks or trademarks of their respective holders. NOTE: The paper used to print this document is an environmentally responsible paper with 10% post consumer waste, with FSC and SFI Chain of Custody certifications, Lacey Act complaint. 100% of the electricity used to manufacture Flo sheets is generated with Green-e certified renewable energy. ED772R15 – Updated August 2016 – For latest specs visit www.legrand.