Cut Sheet

ManualsBrandsWiremold ManualsBoxes & EnclosuresRaised Floor Box, Round, 4" Diameter, Depth: 3-3/16", Metallic

Combination Raised Floor/Wood Floor Box –

Provides an Innovative Open Space Solution

861 Series

™

Floor Boxes bring power or communication

services directly to the point-of-use for open space

applications. 861 Series Floor Boxes have been designed for

use in both raised and wood-constructed floors and are

available with a variety of cover options. These boxes will

accept Wiremold flush-style poke-thru cover assemblies

which are available in dedicated power, communication or

pass-through versions, They will also accept 895 and 896

Series Single Service Covers that are available in brass,

brushed aluminum, and nonmetallic materials.

861 Series Floor Boxes are an ideal solution for bringing

power or communication to board rooms, commercial offices

or upscale residences. And all 861 Series Floor Boxes

include TopGuard protection, an industry-leading design that

not only meets but exceeds UL scrub water exclusion

requirements for tile, wood, and carpeted floors.

FEAT U RES & BE N EF I TS

Individual slide covers on flush poke-thru-style cover

assemblies. Protects power and communication devices.

Power slide cover snaps back into place when receptacle

is not in use. 861AMDTC Floor Box is the only all-

communications unit available with slide cover protection.

Suitable for use in air-handling spaces. In accordance

with Sec. 300-22(C) of the National Electrical Code.

Provides flexibility with a single floor box unit. 861QTC

has a 15A quad receptacle that can be wired in either

standard or isolated ground configuration.

“Step-on-it” installation. Reduces labor cost by eliminating

the need for a routed opening on carpet and tile

applications or special tools for installation. Allows all

wiring to be completed at floor level.

Meets ADA Accessibility Guidelines. The trim flanges for

this product have been designed to meet the ADA

Accessibility Guidelines as it pertains to ADA Standard 4.5

which addresses changes in floor and ground surface

levels. The poke-thru trim flanges are beveled so the slope

is no greater than 1:2 ratio.

Reusable and accessible flip top disposable cover plate.

Prevents unit from seating too far into the sub floor. Saves

time and money during installation by allowing wire

connections to be made at the time of installation, prior to

activating the floor box.

Supported by one of the most complete lines of

activation covers in the industry. Compatible with 895

and 896 Series Covers that are available in brass, brushed

aluminum, and polycarbonate, as well as a variety of

aesthetically-pleasing flush, poke-thru style cover options

to meet any decor and can accommodate most power or

data requirements.

Datacom connectivity option. Accepts industry standard

and proprietary devices from a wide range of manufacturers

to provide a seamless and aesthetically pleasing interface

for voice, data, audio and video applications at the

point-of-use.

TopGuard protection. An integral design which keeps out

water, dirt, and debris from the power and communication

compartments. Whenever you see the TopGuard protection

icon applied to any Wiremold product, you will know that

the product meets and exceeds the new UL scrub water

exclusion requirement.

UL Listed to U.S. and Canadian safety standards for tile,

terrazzo, and the UL requirements under UL514A and

UL514C for the scrub water exclusion test for carpet

and wood floors.

Protection from

water, dirt,

and debris.

ED786R9 – Updated August 2013 – For latest specs visit www.legrand.us/wiremold

861 Series Floor Box – an ideal solution for power

or communication needs.

WIREMOLD

861 Series

™

Floor Box

Summary of content (8 pages)

PAGE 1
WIREMOLD® 861 Series™ Floor Box Combination Raised Floor/Wood Floor Box – Provides an Innovative Open Space Solution 861 Series™ Floor Boxes bring power or communication services directly to the point-of-use for open space applications. 861 Series Floor Boxes have been designed for use in both raised and wood-constructed floors and are available with a variety of cover options.
PAGE 2
861 Series Floor Box Ordering Information Catalog No./Item Description/Specifications Catalog No./Item 861 Raised Floor/Wood Floor Box – Die-cast aluminum construction with three 1/2" trade size knockouts; two on the sides and one on the bottom. 18 cu. in. [295 cu. cm] capacity. Requires a 4" [102mm] diameter hole. Comes complete with a disposable cover. Receptacle and activation sold separately.
PAGE 3
861 Series Floor Boxes Single Service Cover Plates Ordering Information Catalog No./Item Description/Specifications Catalog No./Item Description/Specifications 895 895TCAL Duplex Cover Plate with Flip Lids – Brass (895) or brushed aluminum (895TCAL) duplex cover plate with flip lids, 5 1/2" [140mm] for carpet. 896CK Cover Plate – Brass communication or power cover plate with 2 1/4" [57mm] threaded opening for carpet.
PAGE 4
Flush Quad Power Poke-Thru Style Cover Ordering Information Catalog No./Item Description/Specifications Catalog No./Item Description/Specifications RC9CTCGY RC9CTCBK RC9CTCAL RC9CTCBS RC9CTCAB RC9CTCVY RC9CTCAA Finish Flange & Slide Holder Assembly - Flange available in painted gray (GY), black (BK), ivory (VY), and brushed metal finishes in aluminum (AL) and brass (BS). Aluminum and brass flanges shipped with black cover. Brass flange also available with brass colored cover assembly (AB).
PAGE 5
861 Series Floor Boxes Exploded Views Flush Communications Poke-Thru Style Exploded Views NOTE: RC9CMDTC Cover Assembly shown with Wiremold® Open System inserts. (Modular adapters sold separately.) NOTE: RC9CMDTC Cover Assembly shown with two Ortronics® TracJack bezels. (Modular adapters sold separately.
PAGE 6
861 Series Floor Boxes Exploded Views (continued) Single Service Wood Floor Box Exploded View Flush Quad Power Poke-Thru Style Floor Box Exploded View 861DB Box Assembly 861QTC Box Assembly Flush Communications Poke-Thru Style Series Exploded Views Ortronics® Open System NOTE: 861AMDTC Box Assembly shown with adapter that holds the Activate and Open System inserts NOTE: 861AMDTC Box Assembly shown with Ortronics® Series II and TracJack adapters.
PAGE 7
NOTES 7
PAGE 8
NOTES Electrical Wiring Systems 60 Woodlawn Street West Hartford, CT 06110 Phone: 1.877.BY.LEGRAND (295-3472) www.legrand.us ED786R9 – Updated August 2013 – For latest specs visit www.legrand.us/wiremold © Copyright 2013 Legrand All Rights Reserved 570 Applewood Crescent Vaughan, Ontario L4K 4B4 Phone:905.738.9195 www.legrand.