Cut Sheet

6
Walkerduct Pro Series Trim Plates
A
vailable in brass or brushed aluminum, blanking plates can be used to
cover an abandoned preset opening. They can also be used under a 525
Series Service Fitting or a conduit connector. Hardware to attach plate to
preset is included.
Catalog No./Item Description/Specification
430AL Single Blanking Plate –
430BR In brass or aluminum.
Dimensions are 5 1/16"
x 6 1/16" [129mm x 154mm].
431AL Double Blanking Plate –
431BR In brass or aluminum.
Dimensions are 9 3/16"
x 6 1/16" [233mm x 154mm].
432AL Triple Blanking Plate –
432BR In brass or aluminum.
Dimensions are 13 5/16"
x 6 1/16" [338mm x 154mm].
430AL075 Single Conduit Trim Plate –
430BR075 In brass or aluminum.
Opening for 3/4" trade size
conduit or liquidtite.
Dimensions are 5 1/16"
x 6 1/16" [129mm x 154mm].
Catalog No./Item Description/Specification
431AL075 Double Conduit Trim Plate –
431BR075 In brass or aluminum. Two
openings for 3/4" trade size
conduit or liquidtite.
Dimensions are 9 3/16"
x 6 1/16" [233mm x 154mm].
432AL075 Triple Conduit Trim Plate –
432BR075 In brass or aluminum. Three
openings for 3/4" trade size
conduit or liquidtite.
Dimensions are 9 3/16"
x 6 1/16" [233mm x 154mm].
430S505 Single 525 Trim Plate –
To attach 525 Series Service
Fitting on top of preset.
Aluminum finish only.
Dimensions are 5 1/16"x 6 1/16"
[129mm x 154mm]. Fits
all 525 Series Service Fittings.
431D505 Double 525 Trim Plate –
To attach two 525 Series
Service Fittings on top of
preset. Aluminum finish only.
Dimensions are 9 3/16" x
6 1/16" [233mm x 154mm]. Fits
all 525 Series Service Fittings.
Catalog No./Item Description/Specifications
427 Fiber Loop Kit – Nonmetallic clips snap into tabs
in preset base. Holds up to one meter of fiber optic
or UTP cable. Maintains 1 1/4" [32mm] bend radius.
Walkerduct Pro Series Activations
NOTE: See ED1225 for ordering information on 525 Series Service Fittings.
Source I
®
and Source II
®
Service Fittings are not compatible with Walkerduct Pro Series Presets. Source I can be used as an afterset only.
817B, 817PCC and 817TCAL Series cannot be installed on Walkerduct Source II
®
Systems.