Cut Sheet

5
Catalog No./Item Description/Specifications
428DR Flush Carpet Plate – Single or double duplex
428DR2 opening. Flush plate is 3 7/8" x 4 5/8"
[98mm x 117mm].
428B075 Flush Carpet Plate – Opening fits 3/4" trade size
conduit or liquidtite. Includes spacer for liquidtite
connection. Flush plate is 3 7/8"x 4 5/8"
[98mm x 117mm].
428BL Flush Carpet Plate – Blank plate for abandoning
preset or can be field punched for custom sized
opening. Flush plate is 3 7/8"x 4 5/8"
[98mm x 117mm].
428B525 Flush Carpet Plate – To attach 525 Series Service
Fitting. Center hole diameter is 1 5/8" [41mm]. Flush
plate is 3 7/8" x 4 5/8" [98mm x 117mm].
433DR Flush Carpet Plate – Single or double duplex
433DR2 opening with finishing plate. Oversized plate
covers flush plate and carpet edges. Finishing
plate is 4 3/4" x 5 3/8" [121mm x 137mm].
Flush plate is 3 7/8" x 4 5/8" [98mm x 117mm].
Walkerduct Pro Series Flush Carpet Plates
F
or those applications where a basic connection is needed out
of the preset, steel carpet plates are available. Made of 14 ga.
galvanized steel, these plates provide a sturdy activation for
conduit or receptacle connections. The plate dimensions are 3 7/8"
wide x 4 5/8" long [98mm x 117mm]. Hardware for attaching to
preset is included with plates. Screws provide 1 11/16" [43mm]
upward adjustment.
Steel carpet plates provide a sturdy activation for conduit or
receptacle connections.
– IMPORTANT! –
Flush carpet plates are to be used only within
a protected, enclosed environment such as
under a retail counter on carpeted floors.
– IMPORTANT –
A minimum 1 1/2" preset or afterset is required on Pro Series
underfloor duct to support standard duplex receptacles and
communication devices when using flush activations. The 1"
preset or afterset should be specified for pedestal style fittings
or when cabling will be pulled through the activation point.
– IMPORTANT –
A minimum 1 1/2" preset or afterset is required on Pro Series
underfloor duct to support standard duplex receptacles and
communication devices when using flush activations. The 1"
preset or afterset should be specified for pedestal style fittings
or when cabling will be pulled through the activation point.