Cut Sheet

5
Catalog No./Item Description/Specifications
CM-EPLA* End Plates – Includes two outlet
identification labels with clear
covers and two matching screw
covers. Required for mounting
Pass & Seymour Activate
™
and Wiremold Open System
communication modules into
the 2344SD-2A.
S2-EPL* End Plates – Includes two outlet
identification labels with clear
covers and two matching screw
covers. Required for mounting
Ortronics
®
Series II modules
into the 2344SD-2A.
Item Description Cat. No. Diameter Depth Specifications
Blank Cover 2336 4 1/2" [114mm] — Use with any round fixture box to convert
into junction box.
Extension Box 2337A 5 1/2" [140mm] 1" [25mm] Same as the 2338A except has an open
base to allow back feed from an existing
in-wall box.
Fixture Box 2338A 5 1/2" [140mm] 1" [25mm] For hanging smoke/fire alarms and other
security devices with 3 1/2" [89mm] or
4 1/16" [103mm] mounting centers. Not
for use with ceiling fans.
2344SD-2A
Communication Inserts
5507 Series Faceplate
400/800/2300 Round Fixture Boxes for Non-Divided Raceway
2344SD-2 Over-the-Raceway Box Application
Catalog No./Item Description/Specifications
2344SD-2A* Two-Gang Deep Divided
Box – For use with 2300
and 2300D Raceway.
Provides power and data
at a single point of use.
For use with:
• 5507 Series Faceplates
• Ortronics
®
TracJack & • • •
•Series II Modules
• Pass & Seymour Activate
™
• Series Inserts
• Wiremold Open System
• Communication Modules
Catalog No./Item Description/Specifications
2348D* Device Box – For mounting
standard switches,
receptacles, faceplates
and devices.
• Accepts NEMA Faceplates
2344D* Extra Deep Device Box –
Use when additional depth
is required.For mounting
standard switches,
receptacles, faceplates, and
devices.
• Accepts NEMA Faceplates
T
he 2300 and 2300D Divided Raceway Box family provides two unique benefits; labor savings with “over-the-raceway”
installation and Quick Fit integral faceplate technology. The 2348D and 2344D-2 “over-the-raceway” design eliminates cutting
the raceway base to mount boxes. The base snaps on anywhere along the raceway. The Quick Fit integral faceplate of the
2344SD-2A Box Cover combines superior aesthetics with installation time savings. Pass & Seymour Activate inserts, Wiremold Open
System Communication Modules, and Ortronics Series II Devices snap directly into the Quick Fit faceplate, eliminating additional
faceplates, and the box accepts 5507 Series device plates. The single-gang boxes accept Pass & Seymour Activate, Ortronics, and
other commercially available NEMA standard faceplates.
4 3/4"
[121mm]
4 3/4"
[121mm]
4 3/4"
[121mm]
3"
[76mm]
3"
[76mm]
4 7/8"
[124mm]
1 3/4"
[44mm]
2 3/4"
[70mm]
2 1/4"
[57mm]
Sure-Snap Boxes for 2300BACD Divided Raceway
ORT
P&S
OPEN
ORT
P&S
OPEN
ORT
P&S
OPEN
* Add “WH” suffix for White finish.
Note: Not for use with NEMA Faceplates.