Cut Sheet

2
Catalog No./Item Description/Specifications
400BAC*/800 BAC*/ Base & Cover – Base and cover manufactured of rigid PVC compounds. Cover matte texture.
2300BAC*/2300BACD* Packed ten 5' [1.5m] lengths per carton.
Catalog No./Item Description/Specifications
400WC* Wire Clip – For holding conductors
800WC* in place.
2300WC*
406/806/2306* Cover Clip – For covering joint
of two pieces of 400, 800, or
2300 Cover.
410B/810B/2310B* Blank End Fitting – For closing
end of 400, 800, or 2300 Raceway.
411* 90˚ Flat Elbow – For right angle
turns on same surface.
415* Tee – For branches at right angles.
Catalog No./Item Description/Specifications
417* Internal Elbow – For surfaces at
right angles.
418/818/2318*/** 90˚ External Elbow – For
right angle turns around
external corners.
811/2311*/** 90˚ Flat Elbow – For right angle
turns on same surface.
815/2315*/** Tee – For branches at right angles.
817/2317* Internal Elbow – For surfaces at
right angles.
Cat No. A
400WC 3/4" [19.1mm]
800WC 1" [25mm]
2300WC 1" [25mm]
400, 800, 2300 Surface Nonmetallic Raceway Fittings
Raceway Profiles
1 3/8"
[35mm]
B
B
A
A
A
2 1/16"
[53mm]
1 1/2"
[38mm]
2 5/32"
[55mm]
1 3/8"
[35mm]
2"
[51mm]
3 3/16"
[81mm]
A
A
A
Cat No. A
418 1 1/2" [38mm]
818 2" [51mm]
2318 2 1/2" [64mm]
Cat No. A
817 2" [51mm]
2317 2 1/2" [64mm]
Cat No. A
406 13/16" [20.8mm]
806 1" [25mm]
2306 2" [51mm]
Cat No. A B
410B 13/16" [20.6mm] 1/2" [12.7mm]
810B 1 1/4" [32mm] 1/2" [12.7mm]
2310B 2 1/4" [57mm] 1" [25mm]
Cat No. A B
815 4 1/8" [105mm] 2 3/4" [70mm]
2315 6" [152mm] 4 1/8" [105mm]
Cat No. A
811 2 1/2" [64mm]
2311 4 3/16" [107mm]
A
400BAC*
800BAC*
2300BAC*
2300BACD*
* Add “WH” suffix for White finish.
** For 2300BCD and 2300BACD Raceway must be mitered to use 2311 and 2318. 2315 cannot be used in divided raceway.
7/16"
[11.1mm]
7/8"
[22.2mm]
7/16"
[11.1mm]
11/16"
[17.5mm]
2 1/4"
[57mm]
11/16"
[17.5mm]
2 1/4"
[57mm]
1 5/16"
[33mm]